Metronome
karhincheong·Metronome·kicad/Metronome.kicad_pcb
About the Metronome PCB
Metronome is an open source ESP32 PCB design by karhincheong, published on GitHub. It is a 4-layer board measuring 158.8 × 73.8 mm, with 40 components from 29 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the MCP73871, AMS1117-3.3, MAX98357A and USBLC6-2SC6. By type, the board carries 13 resistors, 7 switches, 6 capacitors, 5 ICs, 4 diodes and 2 connectors.
It belongs with the audio designs in this gallery.
From the project
An electronic metronome
An electronic metronome powered by an ESP32-S3-WROOM Module, utilising a 160 x 128 LCD-TFT screen and a speaker
I find my phone too distracting when attending music class, hence I'm making this metronome on a separate device so that its simple and non-distracting
1. Solder the components by hand onto the PCB. You may opt for PCBA for some of the components but it's expensive. 2. Flash firmware in src/main onto the PCB by connecting your computer to the USB-C on the PCB. You may also have to press down on BOOT and RESET for it to enter serial download mode 3. 3D Print the case of the the…

Main components on the Metronome
Metronome bill of materials (BOM)
40 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | MCP73871 | QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | MAX98357A | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U4 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U5 |
| 1 | JST Connector | JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | HS180S10B HS(汉昇) | LCD-TH_L56.0-W35.0-P2.54_HS180S10B | LCD1 |
| 1 | Speaker | SPK-TH_BD23.0-P10.00-D0.8-L-RD | LS1 |
| 3 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1, SW2, SW4 |
| 1 | Play/Pause | CONN-TH_PB-05B-R | SW3 |
| 1 | RESET | SW-SMD_4P-L4.5-W4.5-P3.00-LS7.0_TS-1009S-03826 | SW6 |
| 1 | PWR_BTN | SW_SPDT_Shouhan_MSK12C02 | SW7 |
| 1 | BOOT | SW-SMD_4P-L4.5-W4.5-P3.00-LS7.0_TS-1009S-03826 | SW8 |
| 1 | NTC 10k | R0805 | TH1 |
| 1 | YELLOW | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | BLUE | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | GREEN | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7 |
| 1 | 22 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 2 | 0.1 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C8 |
| 2 | 4.7 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12 |
| 2 | 2 k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 4 | 10 k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R11, R14, R16 |
| 1 | 15 k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 3 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7 |
| 2 | 5.1 k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13 |
| 1 | 330 k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
Metronome design files
The KiCad project lives in the karhincheong/Metronome repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/Metronome.kicad_pcb
- Schematickicad/Metronome.kicad_sch
- BOMBOM.csv
Metronome: common questions
What microcontroller does the Metronome use?
The Metronome is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Metronome PCB?
The Metronome measures 158.8 × 73.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Metronome?
40 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Metronome design files?
From the karhincheong/Metronome repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Metronome design in my own project?
The repository has no license, so all rights stay with karhincheong. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Metronome without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k