45 open source boards using the MCP73871

Real designs built with the MCP73871, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

45 boardsClear filters|Most starred

How designs wire the MCP73871

Read from the KiCad layouts of 38 open source designs, one per repository: what each pin of the MCP73871 connects to, and the resistors, capacitors and other passives placed on it.

  • The PROG1 pin has a resistor to GND on 32 of 37 designs, most often 2 kΩ (then 1 kΩ).
  • The PROG3 pin has a resistor to GND on 31 of 37 designs, most often 20 kΩ (then 100 kΩ).
  • The THERM pin has a resistor to GND on 24 of 38 designs, most often 10 kΩ (then 15 kΩ).
  • The STAT2 pin has a series resistor on 22 of 38 designs, most often 470 Ω (then 10 kΩ).
OUTpin 1, 20Connected to: Signal 55% · 5V 45%
  • Capacitor to GND on 50% · 10 µF (23), 4.7 µF (16), 1 µF (10)
VPCCpin 2Connected to: 5V 47% · a signal 47%
  • Decoupling capacitor on 47% · 10 µF (8), 1 µF (8), 100 nF (1)
THERMpin 5Connected to: Signal 87%
  • Resistor to GND on 63% · 10 kΩ (19), 15 kΩ (1), 16 kΩ (1)
PGpin 6Connected to: Signal 74% · not connected 26%
  • Series resistor on 55% · 470 Ω (18), 10 kΩ (3)
STAT2pin 7Connected to: Signal 79% · not connected 21%
  • Series resistor on 58% · 470 Ω (19), 10 kΩ (2), 1 kΩ (2)
STAT1/LBOpin 8Connected to: The microcontroller 21%
  • Series resistor on 58% · 470 Ω (17), 10 kΩ (2), 1 kΩ (2)
TEpin 9Connected to: Signal 73% · VBUS 24%
  • Resistor to GND on 41% · 10 kΩ (13), 5.1 kΩ (1), 0 Ω (1)
VSSpin 10, 11, 21Connected to: GND 90%
PROG3pin 12Connected to: Signal 92%
  • Resistor to GND on 84% · 20 kΩ (9), 100 kΩ (8), 10 kΩ (4)
PROG1pin 13Connected to: Signal 95%
  • Resistor to GND on 86% · 2 kΩ (18), 1 kΩ (8), 10 kΩ (3)
VBATpin 14, 15Connected to: VBAT 68% · a signal 32%
  • Decoupling capacitor on 38% · 4.7 µF (20), 10 µF (8)
VBAT_SENSEpin 16Connected to: VBAT 68% · a signal 32%
  • Decoupling capacitor on 38% · 4.7 µF (10), 10 µF (4)
CEpin 17Connected to: Signal 51% · 5V 49%
  • Capacitor to GND on 54% · 1 µF (9), 10 µF (7), 4.7 µF (2)
INpin 18, 19Connected to: 5V 65% · a signal 32%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Marmota by inputlabs, DABO2 by lkesteloot, Thermal camera by Badbird5907 and OpenFence by plyalex.

The MCP73871 in open source designs

The gallery holds 45 open source boards using the MCP73871 from 39 GitHub repositories; a typical one measures about 82.8 × 55.9 mm and carries around 78 components.

60% use four copper layers or more, and 40% carry an open source license.

The most starred is Marmota by inputlabs.

MCP73871: common questions

Where can I find a MCP73871 reference design?

Each of the 45 boards on this page is a real design using the MCP73871. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the MCP73871 PROG1 pin?

The PROG1 pin has a resistor to GND on 32 of 37 designs, most often 2 kΩ (then 1 kΩ). Counted from the KiCad layouts of 38 open source designs using the MCP73871.

What resistor goes on the MCP73871 PROG3 pin?

The PROG3 pin has a resistor to GND on 31 of 37 designs, most often 20 kΩ (then 100 kΩ). Counted from the KiCad layouts of 38 open source designs using the MCP73871.

What resistor goes on the MCP73871 THERM pin?

The THERM pin has a resistor to GND on 24 of 38 designs, most often 10 kΩ (then 15 kΩ). Counted from the KiCad layouts of 38 open source designs using the MCP73871.

What parts are used alongside the MCP73871?

The USBLC6-2SC6, BME280, MAX4466EXK, CP2102N-Axx-xQFN20 and ESP32-C3-WROOM-02-H4 appear in the most repositories here.

Which microcontrollers do boards using the MCP73871 use?

Most are built on ESP32 (22), RP2040/RP2350 (7), STM32 (4) and Microchip SAM (2).

How big is a typical board using the MCP73871?

The median is 82.8 × 55.9 mm, and 40% are two-layer designs.

What is the most popular open source board using the MCP73871?

By GitHub stars, Marmota by inputlabs, with 127 stars.

Can I simulate one of these boards using the MCP73871 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part