OdytsseySwitch
KaztoRay·OdytsseySwitch
About the OdytsseySwitch PCB
OdytsseySwitch is an open source ESP32 PCB design by KaztoRay, published on GitHub. It is a 2-layer board measuring 112 × 102 mm, with 35 components from 22 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AP2112K-3.3 and USBLC6-2SC6. By type, the board carries 9 capacitors, 9 resistors, 7 switches, 6 connectors, 3 ICs and 1 diode.
It belongs with the iot & wireless, keyboards and displays & leds designs in this gallery.
From the project
Five-key wireless macropad: ESP32-S3, SSD1306 OLED, thumbstick, MX hotswap
Five-key wireless macropad built around an ESP32-S3, with a 0.96" OLED and a thumbstick. Reaches a host over USB HID, BLE HID, or Wi-Fi, and can drive other gear through its I2C, UART and addressable-LED outputs.
Both analogue axes sit on ADC1 because ADC2 stops working once the radio is transmitting. The thumbstick is fed 3V3 rather than 5V so its wiper range matches the ADC full scale.
Main components on the OdytsseySwitch
OdytsseySwitch bill of materials (BOM)
35 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | OLED_I2C | PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | QWIIC_I2C | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J4 |
| 1 | RGB_OUT | PinSocket_1x03_P2.54mm_Vertical_SMD_Pin1Left | J5 |
| 1 | EXPANSION | PinSocket_1x08_P2.54mm_Vertical_SMD_Pin1Left | J6 |
| 1 | JOYSTICK | PinSocket_1x05_P2.54mm_Vertical_SMD_Pin1Left | J7 |
| 5 | MX_HOTSWAP | SW_Hotswap_Kailh_MX_1.00u | SW1, SW2, SW3, SW4, SW5 |
| 1 | BOOT | SW_SPST_TL3342 | SW6 |
| 1 | RESET | SW_SPST_TL3342 | SW7 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | 10UF 10uF | C_1206_3216Metric | C1 |
| 3 | 1UF 1uF | C_0603_1608Metric | C2, C4, C7 |
| 2 | 22UF 22uF | C_1206_3216Metric | C3, C5 |
| 3 | 100NF 100nF | C_0603_1608Metric | C6, C8, C9 |
| 3 | 10K 10k | R_0603_1608Metric | R1, R4, R9 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R2, R3 |
| 2 | 4.7K 4.7k | R_0603_1608Metric | R5, R6 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 330 | R_0603_1608Metric | R7 |
| 1 | 1k | R_0603_1608Metric | R8 |
OdytsseySwitch design files
The KiCad project lives in the KaztoRay/OdytsseySwitch repository on GitHub; these links point at the commit this page was built from.
- LayoutOdytsseySwitch.kicad_pcb
- SchematicOdytsseySwitch.kicad_sch
- BOMfab/bom.csv
OdytsseySwitch: common questions
What microcontroller does the OdytsseySwitch use?
The OdytsseySwitch is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the OdytsseySwitch PCB?
The OdytsseySwitch measures 112 × 102 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OdytsseySwitch?
35 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OdytsseySwitch design files?
From the KaztoRay/OdytsseySwitch repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OdytsseySwitch design in my own project?
The repository has no license, so all rights stay with KaztoRay. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the OdytsseySwitch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k