TinyDyno

kgiorgi·TinyDyno·hardware/kicad/TinyDyno.kicad_pcb

TinyDyno PCB layout, top view — open source ESP32 board by kgiorgi

About the TinyDyno PCB

TinyDyno is an open source ESP32 PCB design by kgiorgi, published on GitHub under the MIT license. It is a 2-layer board measuring 72 × 72 mm, with 32 components from 16 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the LR1107G-33, INA226 and LSM6DS3TR-C. By type, the board carries 11 capacitors, 11 resistors, 5 ICs, 2 switches, 1 connector and 1 microphone.

It belongs with the sensors, test & measurement and power & battery designs in this gallery.

From the project

esp32-s3 based board for measuring time and energy of edge AI. Its main use is to compare my kernels to ESP-DL and TensorFlow Lite Micro on identical inputs.

An ESP32-S3 board that measures the speed and energy efficiency of one neural network inference.

What is it exactly? TinyDyno is a custom 72 by 72 mm, 2 layered PCB based on ESP32-S3.It is basically a test bench for machine learning on tiny devices (AKA edgeAI). It runs a neural network based on the data from sensors and measures every inference for time and energy. Time is how long the inference took and energy is how much ESP32-S3 has used during it.

TinyDyno, from the project README
From the project README

Main components on the TinyDyno

TinyDyno bill of materials (BOM)

32 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
LR1107G-33
U1, U2
1
INA226
U3
1
ESP32-S3-WROOM-1-N16R8
U4
1
LSM6DS3TR-C
U5
1
TYPE-C-31-M-12
J1
1
IM69D130V01
MK1
2
TS-1187A-B-A-B
SW1, SW2
1
KT-0603R
D1
3
1u
C1, C3, C8
3
22U
22u
C2, C4, C6
5
100N
100n
C5, C7, C9, C10, C11
5
5.1K
5.1k
R1, R2, R4, R5, R6
1
75M
75m
R3
2
10K
10k
R7, R8
2
22
R9, R11
1
1k
R10

TinyDyno design files

The KiCad project lives in the kgiorgi/TinyDyno repository on GitHub; these links point at the commit this page was built from.

TinyDyno: common questions

What microcontroller does the TinyDyno use?

The TinyDyno is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.

How big is the TinyDyno PCB?

The TinyDyno measures 72 × 72 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TinyDyno?

32 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TinyDyno design files?

From the kgiorgi/TinyDyno repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TinyDyno design in my own project?

Yes, under the terms of its MIT license, which kgiorgi chose for the repository.

Can I test firmware for the TinyDyno without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards