K2.2

khuongvanan·iot-monitoring-broadcast·hardware/audio-dac/k2.2.kicad_pcb

K2.2 PCB layout, top view — open source ESP32 board by khuongvanan

About the K2.2 PCB

K2.2 is an open source ESP32 PCB design by khuongvanan, published on GitHub under the Custom license license. It is a 2-layer board measuring 46.2 × 30.1 mm, with 30 components from 22 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3, RT9013-33GB and XL1509-5.0. By type, the board carries 19 capacitors, 4 ICs, 3 resistors, 2 connectors, 1 diode and 1 inductor.

It belongs with the iot & wireless, audio and sensors designs in this gallery.

From the project

Hệ thống giám sát nhiệt độ, độ ẩm và báo lửa; nhận văn bản hoặc MP3 từ ThingsBoard để phát qua loa. ESP32-S3 xử lý cảm biến, truyền dữ liệu qua modem 4G và điều khiển âm thanh. Cảnh báo lửa được ưu tiên tại thiết bị.

Hệ thống giám sát nhiệt độ, độ ẩm và báo lửa; nhận văn bản hoặc MP3 từ ThingsBoard để phát qua loa. ESP32-S3 xử lý cảm biến, truyền dữ liệu qua modem 4G và điều khiển âm thanh. Cảnh báo lửa được ưu tiên tại thiết bị.

Tên file KiCad bên trong mỗi thư mục được giữ để bảo toàn liên kết project. Thư viện tùy chỉnh rời và model 3D chưa đầy đủ; cần bổ sung trước khi cập nhật linh kiện từ thư viện. Chạy ERC/DRC và tạo Gerber từ PCB trước khi gia công.

Main components on the K2.2

K2.2 bill of materials (BOM)

30 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
PCM5102A
U1
1
AMS1117-3.3
RT9013-33GB
U3
1
RT9013-33GB
U4
1
XL1509-5.0
U5
1
SHT31
Conn_01x03
J1
1
YG1006
Conn_01x02
J2
1
1N5822
D1
1
68UH/2A
68uH/2A
L1
2
2.2nF
C1, C2
3
0.1uF
C3, C4, C8
1
10UF
0.1uF
C5
1
0.1UF
2.2 uF
C6
1
2.2uF
C7
1
1000UF/16V
10uF
C9
2
10uF
C10, C12
1
0.1UF
10uF
C11
1
105
C13
4
105
C14, C17, C18, C19
2
330UF/35V
180uF/35V
C15, C16
1
R1
R1
Show 2 more
QtyPartRefs
1
470R
R2
1
10K
R3

K2.2 design files

The KiCad project lives in the khuongvanan/iot-monitoring-broadcast repository on GitHub; these links point at the commit this page was built from.

K2.2: common questions

What microcontroller does the K2.2 use?

The K2.2 is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the K2.2 PCB?

The K2.2 measures 46.2 × 30.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the K2.2?

30 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the K2.2 design files?

From the khuongvanan/iot-monitoring-broadcast repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the K2.2 design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the K2.2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in iot-monitoring-broadcast

Similar boards