K3.1
khuongvanan·iot-monitoring-broadcast·hardware/esp32-controller/k3.1.kicad_pcb
About the K3.1 PCB
K3.1 is an open source ESP32 PCB design by khuongvanan, published on GitHub under the Custom license license. It is a 2-layer board measuring 78.4 × 66.1 mm, with 59 components from 36 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the CH340C, AMS1117-3.3 and XL1509-5.0. By type, the board carries 16 capacitors, 15 resistors, 11 diodes, 7 connectors, 4 ICs and 2 transistors.
It belongs with the iot & wireless, audio and sensors designs in this gallery.
From the project
Hệ thống giám sát nhiệt độ, độ ẩm và báo lửa; nhận văn bản hoặc MP3 từ ThingsBoard để phát qua loa. ESP32-S3 xử lý cảm biến, truyền dữ liệu qua modem 4G và điều khiển âm thanh. Cảnh báo lửa được ưu tiên tại thiết bị.
Hệ thống giám sát nhiệt độ, độ ẩm và báo lửa; nhận văn bản hoặc MP3 từ ThingsBoard để phát qua loa. ESP32-S3 xử lý cảm biến, truyền dữ liệu qua modem 4G và điều khiển âm thanh. Cảnh báo lửa được ưu tiên tại thiết bị.
Tên file KiCad bên trong mỗi thư mục được giữ để bảo toàn liên kết project. Thư viện tùy chỉnh rời và model 3D chưa đầy đủ; cần bổ sung trước khi cập nhật linh kiện từ thư viện. Chạy ERC/DRC và tạo Gerber từ PCB trước khi gia công.
Main components on the K3.1
K3.1 bill of materials (BOM)
59 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | XL1509-5.0 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 2 | Q_NPN_BEC | SOT-23 | Q1, Q2 |
| 1 | SHT31 | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | YG1006 | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | CONN_01X02 Conn_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | USB_C ESP USB | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J4 |
| 1 | USB_C USB TO UART | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J5 |
| 1 | DP | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J7 |
| 1 | Sound | JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J9 |
| 1 | 4G | JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | 4G |
| 2 | SW_Push | SW_SPST_FSMSM | SW1, SW2 |
| 1 | 1N5822 | D_SMC_Handsoldering | D1 |
| 1 | LED-RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | SK6805 | LED_SK6805_PLCC4_2.4x2.7mm_P1.3mm | D3 |
| 2 | D_Schottky | D_SMA_Handsoldering | D4, D10 |
| 6 | D_TVS | D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D5, D6, D7, D8, D9, D11 |
| 1 | 68UH/2A 68uH/2A | L_Taiyo-Yuden_NR-80xx_HandSoldering | L1 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10uF/25V(20%) | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C10, C12 |
| 4 | 0.1uF/50V(10%) | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C7, C8 |
| 1 | 10uF/5V(20%) | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 10UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 2 | 0.1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C11 |
| 1 | 1000UF/16V 1000uF/16V | CP_Radial_D8.0mm_P3.50mm | C9 |
| 1 | 105 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 1uF/16V(10%) | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14 |
| 2 | 330UF/35V 330uF/35V | CP_Radial_D8.0mm_P5.00mm | C15, C16 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | 22R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R6 |
| 2 | 100K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
| 3 | 10k(1%) | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12 |
| 3 | 0(1%) | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R14, R15 |
| 1 | 5 .1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 3 | 5.1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R18, R19 |
K3.1 design files
The KiCad project lives in the khuongvanan/iot-monitoring-broadcast repository on GitHub; these links point at the commit this page was built from.
K3.1: common questions
What microcontroller does the K3.1 use?
The K3.1 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the K3.1 PCB?
The K3.1 measures 78.4 × 66.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the K3.1?
59 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the K3.1 design files?
From the khuongvanan/iot-monitoring-broadcast repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the K3.1 design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the K3.1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in iot-monitoring-broadcast
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k