4x-DMX-Out-Module

KiloanTV·DMX-Console·hardware/4x-DMX-Out-Module/4x-DMX-Out-Module.kicad_pcb

4x-DMX-Out-Module layout, top view — open source STM32 board by KiloanTV

About the 4x-DMX-Out-Module

4x-DMX-Out-Module is an open source STM32 PCB design by KiloanTV, published on GitHub. It is a 2-layer board measuring 160 × 47.6 mm, with 64 components from 27 distinct parts.

Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the XC6206PXXXMR-REGULATOR_LINEAR, PRTR5V0U2X, W5500 and MAX3485. By type, the board carries 31 capacitors, 11 connectors, 8 ICs, 5 resistors, 4 diodes and 2 fuses.

From the project

Nodes to build a DMX Console.

I really wanted to build my own DMX Console but with modules and nodes so everyone can make a combination which work for themself. I havent designed the display driver board and the network switch yet but that will be in the V2 in the future.

4x-DMX-Out-Module, from the project README
From the project README

Main components on the 4x-DMX-Out-Module

4x-DMX-Out-Module bill of materials (BOM)

64 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F072CBT6
U1
1
XC6206PXXXMR-REGULATOR_LINEAR
XC6206PxxxMR-Regulator_Linear
U3
1
PRTR5V0U2X
U4
1
W5500
U5
4
MAX3485
U6, U7, U8, U9
1
CRYSTAL_GND24
Crystal_GND24
Y2
1
External Power
J1
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J2
1
RJ45_HANRUN_HR911105A_HORIZONTAL
RJ45_Hanrun_HR911105A_Horizontal
J5
4
NC3FAAH
J6, J8, J10, J12
4
NC5FAH
J7, J9, J11, J13
2
C116647
SW_SPST
BOOT1, RST1
2
500MA
500mA
F2, F3
1
C19273151
Active_LED
D5
1
C19171392
Link_LED
D6
1
C19273150
Duplex_LED
D7
1
C19273152
Speed_LED
D8
2
10UF
10uF
C2, C33
15
100NF
100nF
C3, C5, C6, C8, C9, C10, C11, C30 +7
2
1UF
1uF
C4, C7
Show 7 more
QtyPartRefs
2
22PF
22pF
C28, C29
1
C2930060
12,4k ohm 1%
C31
2
10NF
10nF
C34, C35
6
C105881
330 ohm
C36, C37, C38, C39, C43, C44
1
C23631
1nF 2kV
C42
1
C46961738
1M ohm
R2
4
5.1K
5.1k
R3, R4, R5, R6

4x-DMX-Out-Module design files

The KiCad project lives in the KiloanTV/DMX-Console repository on GitHub; these links point at the commit this page was built from.

4x-DMX-Out-Module: common questions

What microcontroller does the 4x-DMX-Out-Module use?

The 4x-DMX-Out-Module is built around the STM32F072CBT6, from the STM32 family.

How big is the 4x-DMX-Out-Module?

The 4x-DMX-Out-Module measures 160 × 47.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 4x-DMX-Out-Module?

64 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 4x-DMX-Out-Module design files?

From the KiloanTV/DMX-Console repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 4x-DMX-Out-Module design in my own project?

The repository has no license, so all rights stay with KiloanTV. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 4x-DMX-Out-Module without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in DMX-Console

Similar boards