Tk1-0805
kr-Eliza·tkey-open-hardware-reproduction·hardware/tk1-2layer/tk1-0805.kicad_pcb
About the Tk1-0805 PCB
Tk1-0805 is an open source FPGA PCB design by kr-Eliza, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 57.6 × 39.8 mm, with 43 components from 19 distinct parts.
Its main chip is the ICE40UP5K-SG48I, from the FPGA family. Other key parts include the MCP1824T-2502E/OT, NCV8164ASN120T1G, CH552E, SST25VF080B-50-4X-S2AX and USBLC6-2SC6. By type, the board carries 17 capacitors, 12 resistors, 7 ICs, 4 diodes, 1 connector and 1 switch.
From the project
Reproducing the Tillitis TKey open hardware security key: 2-layer hand-solderable PCB, lab assembly and bring-up, Voltera prototype, SBOM
Most hardware security keys are closed: their schematics, firmware and key storage cannot be inspected, so users have to trust the vendor. The TKey takes the opposite approach. Its hardware (a Lattice iCE40UP5K FPGA running a small RISC-V core, plus a CH552 USB controller) and its firmware are fully open, which makes it a good subject for a reproduction and hardening project:

Main components on the Tk1-0805
Tk1-0805 bill of materials (BOM)
43 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1824T-2502E/OT MCP1824T-2502EOT Microchip | SOT-23-5 | U1 |
| 1 | NCV8164ASN120T1G onsemi | TSOP-5_1.65x3.05mm_P0.95mm | U2 |
| 1 | CH552E WCH | MSOP-10_3x3mm_P0.5mm | U3 |
| 1 | SST25VF080B-50-4X-S2AX SST25VF080B-50-4x-S2Ax | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U5 |
| 1 | ICE40UP5K-SG48I ICE40UP5K-SG48ITR Lattice | QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm | U6 |
| 1 | NCP752BSN33T1G onsemi | NCP752BSN33T1G | U9 |
| 1 | USB4085-GF-A_REVB | GCT_USB4085-GF-A_REVB | J3 |
| 1 | PTS526 SK15 SMTR2 LFS PTS526_SK15_SMTR2_LFS | PTS526SK15SMTR2LFS | SW2 |
| 1 | LTST-S220TBKT 0805 indicator LED, blue LITEON | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LTST-S220TBKT LED LITEON | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3B1 |
| 1 | LTST-S270KGKT LED LITEON | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3G1 |
| 1 | LTST-S270KRKT LED LITEON | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3R1 |
| 1 | FerriteBead | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1 |
| 7 | CL21A106KPFNNNE 10uF Samsung Electro-Mechanics | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C25 |
| 10 | C0805C104K5RACTU 0.10uF KEMET | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C13, C16, C17, C18, C19, C20, C21 +2 |
| 4 | RC0805FR-071KL 1k YAGEO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R16, R17, R18 |
| 2 | RC0805FR-075K1L 5.1k YAGEO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R29 |
| 6 | RC0805FR-0710KL 10k YAGEO | R_0805_2012Metric | R19, R20, R23, R24, R25, R26 |
Tk1-0805 design files
The KiCad project lives in the kr-Eliza/tkey-open-hardware-reproduction repository on GitHub; these links point at the commit this page was built from.
Tk1-0805: common questions
What microcontroller does the Tk1-0805 use?
The Tk1-0805 is built around the ICE40UP5K-SG48I, from the FPGA family.
How big is the Tk1-0805 PCB?
The Tk1-0805 measures 57.6 × 39.8 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Tk1-0805?
43 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tk1-0805 design files?
From the kr-Eliza/tkey-open-hardware-reproduction repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tk1-0805 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which kr-Eliza chose for the repository.
Can I test firmware for the Tk1-0805 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
More boards in tkey-open-hardware-reproduction
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765