34 open source boards using the ICE40UP5K-SG48I
Real designs built with the ICE40UP5K-SG48I, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Fomu hardware
im-tomu
90 × 50 mm57 parts2LCC-BY-SA-4.0236FPGA
NB3 Hindbrain
NoBlackBoxes
57 × 22.5 mm145 parts4LCC-BY-NC-4.066RP2040/RP2350
Pico2-ice
tinyvision-ai-inc
27.9 × 63.5 mm97 parts4LMIT59FPGA
ICE40-fpga
joshajohnson
50 × 22.9 mm62 parts2LCC-BY-NC-4.026FPGA
TT04+ FPGA ASIC Simulator
TinyTapeout
45 × 52.5 mm77 parts4LApache-2.021FPGA
TinyFPGA-UP
glanc1
17.8 × 35.6 mm55 parts4LCERN-OHL-1.28FPGA
Icey
darshg321
68.7 × 53 mm96 parts4LCERN-OHL-P-2.06FPGA
Ice40-dip40
esynr3z
17.8 × 50.8 mm46 parts4LNo license5FPGA
Mosaic
bitbarista
20.3 × 51.4 mm51 parts4LCustom license3RP2040/RP2350
Pico-Dev iCE
frohro
100 × 100 mm293 parts4LNo license2FPGA
Morphcpu
ranveerlabs
70 × 70 mm80 parts4LAGPL-3.02ESP32
WSPR-ease
alanmimms
99 × 64 mm171 parts4LMIT1RP2040/RP2350
ICEPico
SorenGilkeyJohnson
21 × 51 mm69 parts4LCERN-OHL-S-2.01FPGA
PROGLOG01
mlab-modules
60.5 × 40.1 mm62 parts2LNo license1ESP32
MainBoard
meawoppl
139.7 × 63.5 mm245 parts2LNo license0FPGA
X16-fpga board
eshankiyer
100 × 100 mm215 parts4LNo license0FPGA
FPGA Logic Analyzer
hack-a-tack
89.7 × 82.9 mm144 parts4LNo license0RP2040/RP2350
Adsb devboard
vighnesh-sawant
57.9 × 37.5 mm113 parts4LMIT0RP2040/RP2350
Pico2-ice
frohro
27.9 × 63.5 mm97 parts4LMIT0FPGA
Polaris
aargar1
100.3 × 74.8 mm87 parts6LCERN-OHL-W-2.00FPGA
TT04+ FPGA ASIC Simulator
chipfoundry
45 × 52.5 mm77 parts4LApache-2.00RP2040/RP2350
Ice core
enkhbold470
80 × 60 mm74 parts6LCERN-OHL-S-2.00RP2040/RP2350
BNN
sparshgup
60.8 × 52.7 mm68 parts2LNo license0FPGA
Gps rx
Keyaan-07
16 × 16 mm36 parts4LNo license0FPGA
TinyTapeout ASIC Simulator (for TT3)
TinyTapeout
45 × 52.5 mm72 parts2LApache-2.021FPGA
TinyTapeout ASIC Simulator (for TT3)
chipfoundry
45 × 52.5 mm72 parts2LApache-2.00FPGA
Tk1-0805
kr-Eliza
57.6 × 39.8 mm43 parts2LCERN-OHL-S-2.00ESP32
Module
meawoppl
20 × 45 mm49 parts4LNo license0FPGA
Tt06-fpga-ICE40UP5k
TinyTapeout
50 × 53 mm44 parts4LApache-2.021STM32
Device
jayis1
85 × 54 mm21 parts4LNo license3FPGA
Tt06-fpga-ICE40UP5k
chipfoundry
50 × 53 mm44 parts4LApache-2.00FPGA
Ttdbv3-fpga-ICE40UP5k
TinyTapeout
50 × 48 mm41 parts4LApache-2.021RP2040/RP2350
Ice core
enkhbold470
80 × 60 mm74 parts6LCERN-OHL-S-2.00FPGA
Ttdbv3-fpga-ICE40UP5k
chipfoundry
50 × 48 mm41 parts4LApache-2.00
How designs wire the ICE40UP5K-SG48I
Read from the KiCad layouts of 26 open source designs, one per repository: what each pin of the ICE40UP5K-SG48I connects to, and the resistors, capacitors and other passives placed on it.
- The VCCIO_2 pin has a decoupling capacitor on 24 of 26 designs, most often 100 nF (then 4.7 µF).
- The SPI_VCCIO1 pin has a decoupling capacitor on 23 of 26 designs, most often 100 nF (then 4.7 µF).
- The VCC pins have a decoupling capacitor on 21 of 26 designs, most often 100 nF (then 4.7 µF).
- The VCCIO_0 pin has a decoupling capacitor on 20 of 26 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCIO_2pin 1 | Connected to: 3.3V 96% |
|
| VCCpin 5, 30 | Connected to: 1.2V 96% |
|
| CDONEpin 7 | Connected to: A connector 27%, the microcontroller 27% |
|
| CRESETpin 8 | Connected to: A connector 46%, the microcontroller 35% |
|
| IOB_35B_SPI_SSpin 16 | Connected to: A connector 54%, the microcontroller 35%, W25Q32JVSSIQ 31% |
|
| SPI_VCCIO1pin 22 | Connected to: 3.3V 96% |
|
| VPP_2V5pin 24 | Connected to: 3.3V 65% · a signal 31% |
|
| VCCPLLpin 29 | Connected to: VCC_PLL 54% · a signal 42% |
|
| VCCIO_0pin 33 | Connected to: 3.3V 96% |
|
| RGB0pin 39 | Connected to: Signal 81% · not connected 19% |
|
| RGB1pin 40 | Connected to: Signal 77% · not connected 23% |
|
| RGB2pin 41 | Connected to: Signal 77% · not connected 23% |
|
| GNDpin 49 | Connected to: GND 96% | — |
35 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Fomu hardware by im-tomu, NB3 Hindbrain by NoBlackBoxes, Pico2-ice by tinyvision-ai-inc and ICE40-fpga by joshajohnson.
The ICE40UP5K-SG48I in open source designs
The gallery holds 34 open source boards using the ICE40UP5K-SG48I from 27 GitHub repositories; a typical one measures about 53.5 × 52.5 mm and carries around 72 components.
76% use four copper layers or more, and 62% carry an open source license.
The most starred is Fomu hardware by im-tomu.
Parts used alongside the ICE40UP5K-SG48I
Microcontrollers on boards using the ICE40UP5K-SG48I
What boards using the ICE40UP5K-SG48I are built for
ICE40UP5K-SG48I: common questions
Where can I find a ICE40UP5K-SG48I reference design?
Each of the 34 boards on this page is a real design using the ICE40UP5K-SG48I. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ICE40UP5K-SG48I VCCIO_2 pin?
The VCCIO_2 pin has a decoupling capacitor on 24 of 26 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 26 open source designs using the ICE40UP5K-SG48I.
What decoupling capacitors do designs use on the ICE40UP5K-SG48I SPI_VCCIO1 pin?
The SPI_VCCIO1 pin has a decoupling capacitor on 23 of 26 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 26 open source designs using the ICE40UP5K-SG48I.
What decoupling capacitors do designs use on the ICE40UP5K-SG48I VCC pin?
The VCC pins have a decoupling capacitor on 21 of 26 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 26 open source designs using the ICE40UP5K-SG48I.
What parts are used alongside the ICE40UP5K-SG48I?
The W25Q32JVSSIQ, AP2112K-3.3TRG1, AP2112K-1.2TRG1, USBLC6-2SC6 and NCP115AMX120TCG appear in the most repositories here.
Which microcontrollers do boards using the ICE40UP5K-SG48I use?
Most are built on FPGA (22), RP2040/RP2350 (8), ESP32 (3) and STM32 (1).
How big is a typical board using the ICE40UP5K-SG48I?
The median is 53.5 × 52.5 mm, and 24% are two-layer designs.
What is the most popular open source board using the ICE40UP5K-SG48I?
By GitHub stars, Fomu hardware by im-tomu, with 236 stars.
Can I simulate one of these boards using the ICE40UP5K-SG48I before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.