Starbie
krishivjoshi219-collab·Starbie
About the Starbie PCB
Starbie is an open source ESP32 PCB design by krishivjoshi219-collab, published on GitHub. It is a 2-layer board measuring 84.8 × 84.7 mm, with 12 components from 11 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 3 connectors, 2 ICs, 2 switches, 2 resistors, 1 transistor and 1 buzzer.
It belongs with the sensors and displays & leds designs in this gallery.
From the project
A custom pirate-themed interactive virtual pet console and environmental monitor powered by the Seeed Studio XIAO ESP32-C3.
A custom pirate-themed interactive virtual pet console and environmental monitor powered by the Seeed Studio XIAO ESP32-C3.
Built for Week 1 of the Hack Club Half-Life program, this board features a custom hand-routed crossbones PCB outline, physical motion interaction, environmental tracking, audio feedback, and a custom Straw Hat Luffy sprite.
Microcontroller: Seeed Studio XIAO ESP32-C3 (160 MHz 32-bit RISC-V core). Display Interface: 4-pin female header socket driving a 0.96" I2C SSD1306 monochrome OLED display. Motion Tracking: 8-pin female header socket interfacing an MPU-6050 6-axis…

Main components on the Starbie
Starbie bill of materials (BOM)
12 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C6-DIP | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | Q_NPN_CBE | TO-92L_Inline | Q1 |
| 1 | Conn_01x04_Pin | PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08_Pin | PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 2 | SW_Push | SW_PUSH_6mm | SW1, SW2 |
| 1 | D | D_DO-35_SOD27_P10.16mm_Horizontal | D1 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
Starbie design files
The KiCad project lives in the krishivjoshi219-collab/Starbie repository on GitHub; these links point at the commit this page was built from.
Starbie: common questions
What microcontroller does the Starbie use?
The Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Starbie PCB?
The Starbie measures 84.8 × 84.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Starbie?
12 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Starbie design files?
From the krishivjoshi219-collab/Starbie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Starbie design in my own project?
The repository has no license, so all rights stay with krishivjoshi219-collab. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Starbie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k