Strange games — копия
About the Strange games — копия PCB
Strange games — копия is an open source ESP32 PCB design by kruglovvs, published on GitHub. It is a 2-layer board measuring 166 × 166 mm, with 92 components from 21 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the charge controller, boost converter, LDL1117S33R, TMP112xxDRL and vibrating_sensor. By type, the board carries 33 capacitors, 20 resistors, 13 diodes, 11 switches, 8 ICs and 3 transistors.
From the project
this is the hardware part of the project "Games with secrets"
Main components on the Strange games — копия
Strange games — копия bill of materials (BOM)
92 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | charge controller | charge_controller_module_tp4056 | U1 |
| 1 | boost converter | CKCS BS-01 MT-3608 Boost Converter | U2 |
| 1 | LDL1117S33R | SOT230P700X180-4N | U3 |
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1 | U4 |
| 1 | TMP112xxDRL | SOT-563 | U5 |
| 1 | vibrating_sensor | PinHeader_1x03_P2.54mm_Vertical | U6 |
| 1 | LSM6DS3 | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U7 |
| 1 | MQ-135 gas sensor | PinHeader_1x04_P2.54mm_Vertical | U8 |
| 1 | Motor_DC | PinHeader_1x02_P2.54mm_Vertical | M1 |
| 2 | SI2318DS-T1-GE3 Si2302A Vishay Semiconductor | SOT-23-3 | Q1, Q3 |
| 1 | Q_Photo | LED_D4.0mm | Q4 |
| 1 | Display | TE_3-1734839-4_1x34-1MP_P0.5mm_Horizontal | J1 |
| 1 | R_Potentiometer | TRIM_3362P-1-203LF | RV1 |
| 11 | SW_Push | SW_PUSH-12mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +3 |
| 4 | S07B-GS08 | D_SMF | D1, D2, D3, D4 |
| 9 | yf923 | LED_D5.0mm-4_RGB | D5, D6, D7, D8, D9, D10, D11, D12 +1 |
| 1 | L_Iron | PinHeader_1x02_P2.54mm_Vertical | L1 |
| 28 | C_Generic | C_0402_1005Metric | C1, C11, C12, C13, C14, C15, C18, C19 +20 |
| 5 | C_Generic | C_0805_2012Metric | C3, C4, C16, C17, C32 |
| 12 | RC0603FR-071K2L 10k_0805 Yageo | R_0805_2012Metric | R1, R2, R5, R7, R11, R12, R13, R16 +4 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | RC0603FR-071K2L 330_0805 Yageo | R_0805_2012Metric | R3, R4, R6, R8, R9, R10, R15, R17 |
Strange games — копия design files
The KiCad project lives in the kruglovvs/strange_game repository on GitHub; these links point at the commit this page was built from.
Strange games — копия: common questions
What microcontroller does the Strange games — копия use?
The Strange games — копия is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the Strange games — копия PCB?
The Strange games — копия measures 166 × 166 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Strange games — копия?
92 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Strange games — копия design files?
From the kruglovvs/strange_game repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Strange games — копия design in my own project?
The repository has no license, so all rights stay with kruglovvs. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Strange games — копия without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in strange_game
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k