10 open source boards using the TMP112xxDRL

Real designs built with the TMP112xxDRL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the TMP112xxDRL

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TMP112xxDRL connects to, and the resistors, capacitors and other passives placed on it.

  • The V+ pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 nF).
  • The SCL pin has a pull-up to 3.3V on 6 of 8 designs, most often 5 kΩ (then 10 kΩ).
  • The SDA pin has a pull-up to 3.3V on 6 of 8 designs, most often 5 kΩ (then 10 kΩ).
  • The ADD0 pin is tied to GND on 6 of 8 designs (VCC_SW_P on 2).
SCLpin 1Connected to: The microcontroller 63%
  • Pull-up to 3.3V on 75% · 5 kΩ (2), 10 kΩ (2), 2 kΩ (1)
GNDpin 2Connected to: GND 100%
ADD0pin 4Connected to: GND 75% · VCC_SW_P 25%
V+pin 5Connected to: 3.3V 88%
  • Decoupling capacitor on 88% · 100 nF (5), 10 nF (1)
SDApin 6Connected to: The microcontroller 63%
  • Pull-up to 3.3V on 75% · 5 kΩ (2), 10 kΩ (2), 2 kΩ (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Solar nRF.kicad pro by PocketConcepts, HPM6P41 BB by Alipay1, USB C PD by JBeeBK and FYP Heater by conorcurley5.

The TMP112xxDRL in open source designs

The gallery holds 10 open source boards using the TMP112xxDRL from 8 GitHub repositories; a typical one measures about 74.8 × 70 mm and carries around 48 components.

50% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.

The most starred is Solar nRF.kicad pro by PocketConcepts.

Microcontrollers on boards using the TMP112xxDRL

TMP112xxDRL: common questions

Where can I find a TMP112xxDRL reference design?

Each of the 10 boards on this page is a real design using the TMP112xxDRL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TMP112xxDRL V+ pin?

The V+ pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 8 open source designs using the TMP112xxDRL.

What pull-up resistor is used on the TMP112xxDRL SCL pin?

The SCL pin has a pull-up to 3.3V on 6 of 8 designs, most often 5 kΩ (then 10 kΩ). Counted from the KiCad layouts of 8 open source designs using the TMP112xxDRL.

What pull-up resistor is used on the TMP112xxDRL SDA pin?

The SDA pin has a pull-up to 3.3V on 6 of 8 designs, most often 5 kΩ (then 10 kΩ). Counted from the KiCad layouts of 8 open source designs using the TMP112xxDRL.

Which microcontrollers do boards using the TMP112xxDRL use?

Most are built on ESP32 (4), STM32 (2), Nordic nRF (1) and RP2040/RP2350 (1).

How big is a typical board using the TMP112xxDRL?

The median is 74.8 × 70 mm, and 50% are two-layer designs.

What is the most popular open source board using the TMP112xxDRL?

By GitHub stars, Solar nRF.kicad pro by PocketConcepts, with 341 stars.

Can I simulate one of these boards using the TMP112xxDRL before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part