HardLabs

P8x regbank card

ksr·p8x·hardware/regbank-card/kicad/p8x-regbank-card.kicad_pcb

P8x regbank card PCB layout, top view — open source board by ksr

About the P8x regbank card PCB

P8x regbank card is an open source PCB design by ksr, published on GitHub. It is a 4-layer board measuring 280 × 140 mm, with 95 components from 16 distinct parts.

Other key parts include the 74HCT169, 74HCT244, 74HCT257, 74HCT138 and 74HCT139. By type, the board carries 44 ICs, 44 capacitors, 3 LEDs, 2 resistors and 1 connector.

From the project

Generated by generators/genkicad.py from the canonical geneagle netlist (CARDS["regbank-card"]), same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, a labelled LED/jumper bank, part values on silk. Routed with Freerouting.

Generated by generators/genkicad.py from the canonical geneagle netlist (CARDS["regbank-card"]), same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, a labelled LED/jumper bank, part values on silk. Routed with Freerouting. GENERATORS ARE CANON -- edit genkicad.py and re-run generators/buildkicadcard.sh regbank-card`.

Main components on the P8x regbank card

74HCT16974HCT24474HCT25774HCT13874HCT13974HCT0274HCT1474HCT0874HCT3274HCT377

P8x regbank card bill of materials (BOM)

95 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
16
74HCT169
U1, U2, U3, U4, U5, U6, U7, U8 +8
14
74HCT244
U17, U18, U19, U20, U21, U22, U23, U24 +6
2
74HCT257
U27, U28
3
74HCT138
U30, U31, U33
2
74HCT139
U32, U39
1
74HCT02
U34
1
74HCT14
U35
2
74HCT08
U37, U38
1
74HCT32
U40
2
74HCT377
U41, U42
1
MABC96R
J1
1
1K
RP1
2
GRN
LED3, LED4
1
YEL
LED5
44
100nF
C1, C2, C3, C4, C5, C6, C7, C8 +36
2
1K
R4, R5

P8x regbank card design files

The KiCad project lives in the ksr/p8x repository on GitHub; these links point at the commit this page was built from.

P8x regbank card: common questions

How big is the P8x regbank card PCB?

The P8x regbank card measures 280 × 140 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the P8x regbank card?

95 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the P8x regbank card design files?

From the ksr/p8x repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the P8x regbank card design in my own project?

The repository has no license, so all rights stay with ksr. Use it as a reference, and ask the author before reusing the design.

More boards in p8x