40 open source boards using the 74HCT244
Real designs built with the 74HCT244, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
LittleSixteen
SukkoPera
389 × 136.2 mm329 parts2LCustom license76Amiga-N2630
jasonsbeer
318.4 × 124.5 mm231 parts4LNo license69Multicomp6809
nealcrook
170 × 145 mm115 parts2LNo license63Amiga 2000R6
iansbremner
416.8 × 346.1 mm553 parts2LNo license19AVR/Arduino
Emurom
jtsiomb
90.6 × 77.8 mm48 parts2LCC-BY-SA-4.015STM32
MidiMonger components
dchwebb
40 × 100 mm64 parts2LNo license12OpenEarlyMacsRAMexpansion
Builder68
137 × 92 mm60 parts2LCERN-OHL-S-2.010Schwim repacked
hkzlab
17.9 × 35.8 mm7 parts2LNo license6Adcboard
nuclearfutureslab
184 × 80 mm124 parts2LGPL-3.05Resound-2-MCA-OPL3
texelec
131.1 × 88.3 mm53 parts2LNo license5Adcboard
sgs-lab
184 × 80 mm124 parts2LNo license2M6809-multicomputer
cartheur
170 × 145 mm111 parts2LMIT1Exordisk v1
roberto314
160 × 100 mm110 parts2LNo license1M5stamp slic fxs
GOROman
120 × 90 mm154 parts2LNo license0Allpro88-socket module
cannon-zz
257 × 204.5 mm127 parts2LNo license0Excalibur64
Cptscorcher
209 × 175 mm125 parts2LGPL-3.00STM32
Menelaos rev-4
acastles91
99.5 × 91 mm124 parts4LNo license0ESP8266
LED-Strip clock
atoomnetmarc
142.2 × 116.8 mm104 parts2LApache-2.00P8x peripheral card
ksr
280 × 140 mm101 parts4LNo license0RP2040/RP2350
Picolino-CPC
salvogendut
150 × 120 mm81 parts2LGPL-3.001802-Mini-9918-Video
dmadole
100 × 100 mm73 parts2LNo license0AVR/Arduino
High Torque Servo Arm: Main
akornsys-rdi
100 × 72 mm73 parts2LGPL-3.00TriBit-Lux
XEMACS-666
80 × 41 mm57 parts2LNo license0Skaner3d
DamianPodrazaCode
175 × 90 mm52 parts2LNo license0AVR/Arduino
Mod emup usb
sharpdad
120 × 80 mm18 parts2LMIT08-bit computer Input Module
xrayer2000
106 parts2LCC-BY-NC-4.030GPIO
89Mods
209.6 × 108.5 mm113 parts4LMIT2P8x regbank card
ksr
280 × 140 mm95 parts4LNo license0ESP32
Menelaos v2
acastles91
99.5 × 81 mm82 parts2LNo license0ESP32
Chairbot
bullestock
66.9 × 100 mm30 parts2LNo license0Exorset Floppy
roberto314
160 × 100 mm85 parts2LNo license1Pico RP2350 USB Power
aaronsilinskas
75 × 63 mm25 parts4LMIT1P8x alu card
ksr
280 × 140 mm77 parts4LNo license0P8x io card
ksr
280 × 140 mm62 parts4LNo license0Videoexpansioncard vdc
MicroLind-Developers
94 × 147.6 mm30 parts2LCERN-OHL-P-2.00P8x control card
ksr
280 × 140 mm55 parts4LNo license0
How designs wire the 74HCT244
Read from the KiCad layouts of 30 open source designs, one per repository: what each pin of the 74HCT244 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 19 of 30 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 100% | — |
| VCCpin 20 | Connected to: 5V 93% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LittleSixteen by SukkoPera, Amiga-N2630 by jasonsbeer, Multicomp6809 by nealcrook and Amiga 2000R6 by iansbremner.
The 74HCT244 in open source designs
The gallery holds 40 open source boards using the 74HCT244 from 31 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 79 components.
73% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is LittleSixteen by SukkoPera.
Parts used alongside the 74HCT244
Microcontrollers on boards using the 74HCT244
What boards using the 74HCT244 are built for
74HCT244: common questions
Where can I find a 74HCT244 reference design?
Each of the 40 boards on this page is a real design using the 74HCT244. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT244 VCC pin?
The VCC pin has a decoupling capacitor on 19 of 30 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 30 open source designs using the 74HCT244.
What parts are used alongside the 74HCT244?
The 74HCT245, 74HCT00, 74HCT04, 74HCT74 and 74HCT02 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT244 use?
Most are built on AVR/Arduino (3), RP2040/RP2350 (3), ESP32 (2) and STM32 (2).
How big is a typical board using the 74HCT244?
The median is 160 × 100 mm, and 73% are two-layer designs.
What is the most popular open source board using the 74HCT244?
By GitHub stars, LittleSixteen by SukkoPera, with 76 stars.
Can I simulate one of these boards using the 74HCT244 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.