51 open source boards using the 74HCT08
Real designs built with the 74HCT08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
8bit computer
vascofazza
297.2 × 180.3 mm327 parts2LMIT314Amiga 2000 EATX
jasonsbeer
304.8 × 330.2 mm599 parts4LGPL-3.0199RC6502 General Video Adapter
tebl
99.1 × 99.7 mm80 parts2LGPL-3.0192LittleSixteen
SukkoPera
389 × 136.2 mm329 parts2LCustom license76AVR/Arduino
Hardmpu wt
PickledDog
106.1 × 95.4 mm46 parts2LApache-2.030MSX ONE
jdgabbard
200 × 150 mm107 parts2LGPL-3.028Power-Clock
DutchMaker
121.9 × 121.9 mm45 parts2LNo license14Pihat all
yope
143 × 97 mm305 parts2LGPL-2.011NXP
Lpcsaur
bullestock
100 × 100 mm145 parts4LNo license4Tinyfs
sittner
69.9 × 96.1 mm37 parts2LGPL-3.03Atari 2600 SECAM to RGB
f1ac0
20.3 × 24.1 mm33 parts2LNo license3Yali
dilshan
69.4 × 21.6 mm27 parts2LMIT3Rc2014-cv megacart ram
ezod
99.1 × 76.8 mm31 parts2LNo license2TTL 6510 Computer
StefansAI
368.3 × 215.9 mm330 parts2LNo license1OSM39
christophetoularastel-eng
388.1 × 200 mm186 parts2LGPL-3.01Sweet sixteen
MaZderMind
116 × 105 mm81 parts2LBSD-2-Clause1AVR/Arduino
8bit computer
saktheeswaranswan
297.2 × 180.3 mm327 parts2LMIT0RP2040/RP2350
EVA1 v2
roberto314
218 × 125 mm141 parts2LNo license0PIC
DMX to Ethernet Low Current Mains Dimmer
CarnivalBen
200.7 × 123.2 mm111 parts2LMIT0P8x peripheral card
ksr
280 × 140 mm101 parts4LNo license0E800j scartman
codepainters
88 × 36.5 mm55 parts2LNo license0Dlc32
Hal9k-dk
99.8 × 43.9 mm55 parts2LNo license0AVR/Arduino
Bus bridge encoders sonar
makerbus
100 × 50 mm47 parts2LNo license0AVR/Arduino
Bus beaglebone
makerbus
100 × 50 mm44 parts2LNo license0AVR/Arduino
Bus sonar10
makerbus
100 × 50 mm36 parts2LNo license08-bit computer Input Module
xrayer2000
106 parts2LCC-BY-NC-4.03074HCT6526 Board 4
dmolinagarcia
100 × 100 mm76 parts4LNo license14Mkssbase
bullestock
46 × 79.3 mm50 parts2LNo license4AFI-K5173
Stefan311
100 × 160 mm46 parts2LBSD-2-Clause2TTL 6510 Computer fab
StefansAI
368.3 × 215.9 mm330 parts2LNo license1PIC
Dmx eth dimmer
CarnivalBen
148 × 156 mm109 parts2LMIT0P8x regbank card
ksr
280 × 140 mm95 parts4LNo license0Mkssbase
Hal9k-dk
46 × 79.3 mm50 parts2LNo license0Microchip SAM
Duet 2 Maestro
Duet3D
100 × 123 mm336 partsCERN-OHL-1.225874HCT6526 Board 0
dmolinagarcia
100 × 100 mm73 parts4LNo license14Lasersaurv2
bullestock
46 × 66.6 mm45 parts2LNo license4
How designs wire the 74HCT08
Read from the KiCad layouts of 32 open source designs, one per repository: what each pin of the 74HCT08 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 17 of 32 designs, most often 100 nF (then 220 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 94% | — |
| VCCpin 14 | Connected to: VCC 94% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8bit computer by vascofazza, Duet 2 Maestro by Duet3D, Amiga 2000 EATX by jasonsbeer and RC6502 General Video Adapter by tebl.
The 74HCT08 in open source designs
The gallery holds 51 open source boards using the 74HCT08 from 33 GitHub repositories; a typical one measures about 111 × 102.5 mm and carries around 64 components.
66% are two-layer designs, the rest use four layers or more, and 39% carry an open source license.
The most starred is 8bit computer by vascofazza.
Parts used alongside the 74HCT08
Microcontrollers on boards using the 74HCT08
What boards using the 74HCT08 are built for
74HCT08: common questions
Where can I find a 74HCT08 reference design?
Each of the 51 boards on this page is a real design using the 74HCT08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT08 VCC pin?
The VCC pin has a decoupling capacitor on 17 of 32 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 32 open source designs using the 74HCT08.
What parts are used alongside the 74HCT08?
The 74HCT32, 74HCT04, 74HCT245, 74HCT00 and 74HCT74 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT08 use?
Most are built on AVR/Arduino (7), PIC (2), NXP (1) and RP2040/RP2350 (1).
How big is a typical board using the 74HCT08?
The median is 111 × 102.5 mm, and 66% are two-layer designs.
What is the most popular open source board using the 74HCT08?
By GitHub stars, 8bit computer by vascofazza, with 314 stars.
Can I simulate one of these boards using the 74HCT08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.