8 open source boards using the 74HCT257
Real designs built with the 74HCT257, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Z80ctrlng
jblang
101.6 × 53.3 mm63 parts4LMIT73GameController
jblang
99.1 × 49.9 mm53 parts2LNo license18OpenEarlyMacsRAMexpansion
Builder68
137 × 92 mm60 parts2LCERN-OHL-S-2.010PIC
TELESTRAT II
Fred72z
170 × 170 mm149 parts2LGPL-2.056309-Unleashed
FredericSegard
252.7 × 106.7 mm95 parts2LNo license3Rc-256page
PickledDog
99.1 × 49.9 mm12 parts2LApache-2.02P8x regbank card
ksr
280 × 140 mm95 parts4LNo license0Z80ram
jblang
99.8 × 49.9 mm19 parts2LMIT73
How designs wire the 74HCT257
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74HCT257 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: VCC 100% |
|
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Z80ctrlng by jblang, GameController by jblang, OpenEarlyMacsRAMexpansion by Builder68 and TELESTRAT II by Fred72z.
The 74HCT257 in open source designs
The gallery holds 8 open source boards using the 74HCT257 from 7 GitHub repositories; a typical one measures about 119.3 × 72.7 mm and carries around 62 components.
75% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Z80ctrlng by jblang.
Parts used alongside the 74HCT257
Microcontrollers on boards using the 74HCT257
What boards using the 74HCT257 are built for
74HCT257: common questions
Where can I find a 74HCT257 reference design?
Each of the 8 boards on this page is a real design using the 74HCT257. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT257 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the 74HCT257.
What parts are used alongside the 74HCT257?
The 74HCT138, 74HCT32, 74HCT14, 74HCT244 and 74HCT541 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT257 use?
Most are built on PIC (1).
How big is a typical board using the 74HCT257?
The median is 119.3 × 72.7 mm, and 75% are two-layer designs.
What is the most popular open source board using the 74HCT257?
By GitHub stars, Z80ctrlng by jblang, with 73 stars.
Can I simulate one of these boards using the 74HCT257 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.