10 open source boards using the 74HCT377
Real designs built with the 74HCT377, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Ab register
TomNisbet
102 × 96 mm60 parts2LMIT18P8x regbank card
ksr
280 × 140 mm95 parts4LNo license0Xy register
TomNisbet
102 × 96 mm60 parts2LMIT18P8x alu card
ksr
280 × 140 mm77 parts4LNo license0D register
TomNisbet
102 × 96 mm52 parts2LMIT18P8x control card
ksr
280 × 140 mm55 parts4LNo license08-bit computer ALU
xrayer2000
99.1 × 87.6 mm46 parts2LCC-BY-NC-4.030NQSAP-PCB Instruction Register and Ring Counter
TomNisbet
102 × 96 mm52 parts2LMIT18Alu
TomNisbet
102 × 96 mm40 parts2LMIT18NQSAP-PCB RAM and MAR
TomNisbet
102 × 96 mm40 parts2LMIT18
The 74HCT377 in open source designs
The gallery holds 10 open source boards using the 74HCT377 from 3 GitHub repositories; a typical one measures about 102 × 96 mm and carries around 54 components.
70% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is 8-bit computer ALU by xrayer2000.
Parts used alongside the 74HCT377
What boards using the 74HCT377 are built for
74HCT377: common questions
Where can I find a 74HCT377 reference design?
Each of the 10 boards on this page is a real design using the 74HCT377. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 74HCT377?
The 74HCT157, 74HCT00, 74HCT02, 74HCT04 and 74HCT138 appear in the most repositories here.
How big is a typical board using the 74HCT377?
The median is 102 × 96 mm, and 70% are two-layer designs.
What is the most popular open source board using the 74HCT377?
By GitHub stars, 8-bit computer ALU by xrayer2000, with 30 stars.
Can I simulate one of these boards using the 74HCT377 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.