30 open source boards using the 74HCT02
Real designs built with the 74HCT02, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
8bit computer
vascofazza
297.2 × 180.3 mm327 parts2LMIT314ESP32
Duet 2
Duet3D
100 × 123 mm348 partsCERN-OHL-1.2258LittleSixteen
SukkoPera
389 × 136.2 mm329 parts2LCustom license76RP2040/RP2350
DuPal V3
DuPAL-PAL-DUmper
116.8 × 73.7 mm128 parts2LCC-BY-SA-4.057MSX ONE
jdgabbard
200 × 150 mm107 parts2LGPL-3.028TMS9918-9928
polpo
20.3 × 51.1 mm13 parts2LCERN-OHL-P-2.0238 16 computer 2
halfburnttoast
208 × 110 mm111 parts2LNo license21Hannes512
SukkoPera
54.3 × 72.2 mm24 parts2LNo license8SVI-2017
patricklaf
100 × 100 mm40 parts2LNo license2Rc2014-cv megacart ram
ezod
99.1 × 76.8 mm31 parts2LNo license2TTL 6510 Computer
StefansAI
368.3 × 215.9 mm330 parts2LNo license1SST-6809-V2.2
KenWillmott
100 × 100 mm46 parts4LMIT1TRS80 3D
palazzol
130.9 × 81.3 mm37 parts2LNo license1177x DFS Controller
kgl2001
38 × 53 mm11 parts2LCC-BY-SA-4.01AVR/Arduino
8bit computer
saktheeswaranswan
297.2 × 180.3 mm327 parts2LMIT0Excalibur64
Cptscorcher
209 × 175 mm125 parts2LGPL-3.00Motherboard
MicroLind-Developers
170.2 × 170.2 mm120 parts4LCERN-OHL-P-2.00Morse Board 8088 TEST BOARD
ifilot
172.1 × 108 mm80 parts2LCERN-OHL-S-2.00ESP8266
Duet WIFI
Duet3D
100 × 123 mm345 partsCERN-OHL-1.2258Registers-StackPointer
DutchMaker
121.9 × 121.9 mm19 parts2LNo license14TTL 6510 Computer fab
StefansAI
368.3 × 215.9 mm330 parts2LNo license1P8x regbank card
ksr
280 × 140 mm95 parts4LNo license0Morseboard-8088
ifilot
127 × 127 mm55 parts2LCERN-OHL-S-2.00VideoBoard
Cptscorcher
143 × 175 mm51 parts2LGPL-3.00Microchip SAM
Duet 2 Maestro
Duet3D
100 × 123 mm336 partsCERN-OHL-1.2258NXP
Duex5
Duet3D
100 × 123 mm252 partsCERN-OHL-1.2258Proto irq
MicroLind-Developers
61 × 76.2 mm21 parts2LCERN-OHL-P-2.00Alu
TomNisbet
102 × 96 mm40 parts2LMIT18Gd 6502 proto
baldengineer
90.4 × 52.2 mm34 parts4LMIT33NQSAP-PCB Flags and Jump Control
TomNisbet
102 × 96 mm29 parts2LMIT18
How designs wire the 74HCT02
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the 74HCT02 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 15 of 21 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 90% | — |
| VCCpin 14 | Connected to: VCC 90% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8bit computer by vascofazza, Duet 2 by Duet3D, LittleSixteen by SukkoPera and DuPal V3 by DuPAL-PAL-DUmper.
The 74HCT02 in open source designs
The gallery holds 30 open source boards using the 74HCT02 from 22 GitHub repositories; a typical one measures about 119.4 × 122.5 mm and carries around 88 components.
85% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is 8bit computer by vascofazza.
Parts used alongside the 74HCT02
Microcontrollers on boards using the 74HCT02
What boards using the 74HCT02 are built for
74HCT02: common questions
Where can I find a 74HCT02 reference design?
Each of the 30 boards on this page is a real design using the 74HCT02. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT02 VCC pin?
The VCC pin has a decoupling capacitor on 15 of 21 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 22 open source designs using the 74HCT02.
What parts are used alongside the 74HCT02?
The 74HCT08, 74HCT245, 74HCT00, 74HCT138 and 74HCT32 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT02 use?
Most are built on AVR/Arduino (2), ESP32 (1), ESP8266 (1) and NXP (1).
How big is a typical board using the 74HCT02?
The median is 119.4 × 122.5 mm, and 85% are two-layer designs.
What is the most popular open source board using the 74HCT02?
By GitHub stars, 8bit computer by vascofazza, with 314 stars.
Can I simulate one of these boards using the 74HCT02 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.