4 open source boards using the D24V22F5
Real designs built with the D24V22F5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Chickencoop3.2
vinthewrench
130 × 100 mm47 parts2LMIT1ESP32
Digit ESP32 2025
SHC-ASTRA
47 × 101 mm56 parts2LAGPL-3.00PCB 4
kubbd
59.6 × 59.6 mm12 parts2LNo license0AVR/Arduino
Chickencoop3.3
vinthewrench
130 × 100 mm47 parts2LMIT1
The D24V22F5 in open source designs
The gallery holds 4 open source boards using the D24V22F5 from 3 GitHub repositories; a typical one measures about 94.8 × 100 mm and carries around 47 components.
100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Chickencoop3.2 by vinthewrench.
Microcontrollers on boards using the D24V22F5
What boards using the D24V22F5 are built for
D24V22F5: common questions
Where can I find a D24V22F5 reference design?
Each of the 4 boards on this page is a real design using the D24V22F5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the D24V22F5 use?
Most are built on AVR/Arduino (2) and ESP32 (1).
How big is a typical board using the D24V22F5?
The median is 94.8 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the D24V22F5?
By GitHub stars, Chickencoop3.2 by vinthewrench, with 1 stars.
Can I simulate one of these boards using the D24V22F5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.