45lux
lachlanfysh·45lux
About the 45lux PCB
45lux is an open source ESP32 PCB design by lachlanfysh, published on GitHub. It is a 2-layer board measuring 120 × 185 mm, with 69 components from 17 distinct parts.
Its main chip is the ESP32-C6-MINI-1, from the ESP32 family. Other key parts include the AP2112K-3.3, TCA9546APW, OPT3004, LIS2DH and AS7343xDLG. By type, the board carries 27 capacitors, 22 ICs, 13 resistors, 4 switches, 1 connector and 1 battery holder.
It belongs with the sensors, iot & wireless and displays & leds designs in this gallery.
From the project
4x5 large format camera light meter PCB — 16x TSL2591 HDR sensors, ESP32-S3 BLE, SSD1327 OLED, LIS2DH IMU
Main components on the 45lux
45lux bill of materials (BOM)
69 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | ESP32-C6-MINI-1 | ESP32-C6-MINI-1 | U2 |
| 1 | TCA9546APW | TSSOP-16_4.4x5mm_P0.65mm | U3 |
| 16 | OPT3004 | DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U4, U5, U6, U7, U8, U9, U10, U11 +8 |
| 1 | LIS2DH | Bosch_LGA-14_3x2.5mm_P0.5mm | U20 |
| 1 | AS7343xDLG | AMS_OLGA-8_2x3.1mm_P0.8mm | U21 |
| 1 | LM393 | SOIC-8_3.9x4.9mm_P1.27mm | U22 |
| 1 | Conn_01x04_Pin | Molex_200528-0040_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | 3xAAA | BatteryHolder_Keystone_2479_3xAAA | BT1 |
| 4 | SW_Push | SW_TH_Tactile_Omron_B3F-106x | SW1, SW2, SW3, SW4 |
| 1 | BPW34-SMD | Osram_BPW34S-SMD | D1 |
| 2 | 10uF | C_0805_2012Metric | C1, C7 |
| 25 | 100nF | C_0603_1608Metric | C2, C3, C4, C5, C6, C8, C9, C10 +17 |
| 2 | 4.7K | R_0603_1608Metric | R1, R2 |
| 9 | 10K | R_0603_1608Metric | R3, R4, R5, R8, R9, R10, R11, R12 +1 |
| 1 | 100K | R_0603_1608Metric | R6 |
| 1 | 1M | R_0603_1608Metric | R7 |
45lux design files
The KiCad project lives in the lachlanfysh/45lux repository on GitHub; these links point at the commit this page was built from.
- Layout45lux.kicad_pcb
45lux: common questions
What microcontroller does the 45lux use?
The 45lux is built around the ESP32-C6-MINI-1, from the ESP32 family.
How big is the 45lux PCB?
The 45lux measures 120 × 185 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 45lux?
69 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the 45lux design files?
From the lachlanfysh/45lux repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 45lux design in my own project?
The repository has no license, so all rights stay with lachlanfysh. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 45lux without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in 45lux
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k