9 open source boards using the ESP8266
Real designs built with the ESP8266, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Wifi PB panel
AntonioMR
100 × 100 mm162 parts2LNo license29ESP8266
Cc pcbRedo
lagunter145
146.1 × 101.6 mm86 parts2LNo license2ESP8266
Seven segments clock
erickpires
337 × 76.1 mm125 parts2LNo license0ESP8266
Jrgbwww24
BrianLeishman
85 × 56 mm31 parts2LNo license0AVR/Arduino
Arduino-Wi-Fi-Signal-Strength-Tool
rajsinghtech
123.1 × 54.4 mm28 parts4LNo license0ESP8266
Wifi PB
AntonioMR
100 × 49.7 mm161 parts2LNo license29ESP8266
Cc pcb
lagunter145
145.2 × 105.1 mm83 parts2LNo license2ESP8266
New
rajeev2705
148.5 × 117.3 mm79 parts2LNo license0ESP8266
PCB PANELIZED
rajeev2705
296.5 × 240.8 mm70 parts2LNo license0
How designs wire the ESP8266
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP8266 connects to, and the resistors, capacitors and other passives placed on it.
- The RESERVED pins is left unconnected on 83% of them (a signal on 2).
- The GPIO10 pin is left unconnected on 4 of 6 designs (a signal on 2).
- The EN pin is left unconnected on 4 of 4 designs.
- The RESET pin is left unconnected on 4 of 4 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ADC0pin 1 | Connected to: Signal 50% · not connected 17% · GND 33% |
|
| RESERVEDpin 2, 3 | Connected to: Not connected 83% · a signal 17% | — |
| GPIO10pin 4 | Connected to: Not connected 67% · a signal 33% | — |
| SCLKpin 9 | Connected to: Not connected 75% · a signal 25% | — |
| GNDpin 10, 14, 17, 24 | Connected to: GND 67% · not connected 20% | — |
| ENpin 12 | Connected to: Not connected 100% | — |
| RESETpin 13 | Connected to: Not connected 100% | — |
| VINpin 15 | Connected to: 5V 75% · GND 25% | — |
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Wifi PB by AntonioMR, Cc pcb by lagunter145, Jrgbwww24 by BrianLeishman and Seven segments clock by erickpires.
The ESP8266 in open source designs
The gallery holds 9 open source boards using the ESP8266 from 6 GitHub repositories; a typical one measures about 145.2 × 100 mm and carries around 83 components.
89% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Wifi PB panel by AntonioMR.
Microcontrollers on boards using the ESP8266
What boards using the ESP8266 are built for
ESP8266: common questions
Where can I find a ESP8266 reference design?
Each of the 9 boards on this page is a real design using the ESP8266. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP8266 RESERVED pin connected?
The RESERVED pins is left unconnected on 83% of them (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the ESP8266.
How is the ESP8266 GPIO10 pin connected?
The GPIO10 pin is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the ESP8266.
How is the ESP8266 EN pin connected?
The EN pin is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 6 open source designs using the ESP8266.
Which microcontrollers do boards using the ESP8266 use?
Most are built on ESP8266 (8) and AVR/Arduino (1).
How big is a typical board using the ESP8266?
The median is 145.2 × 100 mm, and 89% are two-layer designs.
What is the most popular open source board using the ESP8266?
By GitHub stars, Wifi PB panel by AntonioMR, with 29 stars.
Can I simulate one of these boards using the ESP8266 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.