Sub circuito do microcontrolador
About the Sub circuito do microcontrolador PCB
Sub circuito do microcontrolador is an open source PIC PCB design by laurapellizari, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 41 components from 25 distinct parts.
Its main chip is the PIC32MM0064GPM048-I_PT, from the PIC family. Other key parts include the LD1117S50TR_SOT223, LD1117S33TR_SOT223 and MCP2200-I-SO. By type, the board carries 16 capacitors, 8 resistors, 5 connectors, 5 LEDs, 4 ICs and 1 crystal.
From the project
Embedded hardware design for learning
Main components on the Sub circuito do microcontrolador
Sub circuito do microcontrolador bill of materials (BOM)
41 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC32MM0064GPM048-I_PT | QFP50P900X900X120-49N | IC1 |
| 1 | LD1117S50TR_SOT223 | SOT-223-3_TabPin2 | U1 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U2 |
| 1 | MCP2200-I-SO | SOIC-20W_7.5x12.8mm_P1.27mm | U3 |
| 1 | 12MHz | XTAL_ECS-120-20-4X | Y1 |
| 2 | USB_B | USB_B_OST_USB-B1HSxx_Horizontal | J1, J2 |
| 1 | RX/TX | SSQ-102-03-T-S | J3 |
| 1 | PJ-002A | CUI_PJ-002A | J4 |
| 1 | ICSP | TE_826951-6 | J5 |
| 1 | 1N5819 | D_SOD-123 | D_Schottky1 |
| 1 | SWL1 | SW_1825910-6-4 | MCLR1 |
| 1 | LED] | LED_1206_3216Metric | LED2 |
| 1 | LED | LED_1206_3216Metric | LED3 |
| 1 | LED_ALIM | LED_1206_3216Metric | LED_1 |
| 1 | Lx_LED | LED_1206_3216Metric | LED_4 |
| 1 | Rx_LED | LED_1206_3216Metric | LED_5 |
| 11 | 100nF | C_0805_2012Metric | C1, C3, C5, C6, C7, C8, C10, C11 +3 |
| 2 | 10uF | C_1206_3216Metric | C2, C4 |
| 1 | 10uF | C_0805_2012Metric | C9 |
| 2 | 22pF | C_0805_2012Metric | C13, C14 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470 | R_0805_2012Metric | R1 |
| 1 | 1k | R_0805_2012Metric | R2 |
| 4 | 120 | R_0805_2012Metric | R3, R4, R5, R6 |
| 1 | 4k7 | R_0805_2012Metric | R8 |
| 1 | 10k | R_0805_2012Metric | R9 |
Sub circuito do microcontrolador design files
The KiCad project lives in the laurapellizari/PBLE01---Hardware repository on GitHub; these links point at the commit this page was built from.
Sub circuito do microcontrolador: common questions
What microcontroller does the Sub circuito do microcontrolador use?
The Sub circuito do microcontrolador is built around the PIC32MM0064GPM048-I_PT, from the PIC family.
How big is the Sub circuito do microcontrolador PCB?
The Sub circuito do microcontrolador measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sub circuito do microcontrolador?
41 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sub circuito do microcontrolador design files?
From the laurapellizari/PBLE01---Hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Sub circuito do microcontrolador design in my own project?
The repository has no license, so all rights stay with laurapellizari. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sub circuito do microcontrolador without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in PBLE01---Hardware
PICLayout
100 × 100 mm89 parts2LNo license0
PICSub circ completo (2)
100 × 67 mm77 parts2LNo license0
Sub circ interface
2.8 × 2.8 mm19 parts2LNo license0
Sub circuito perifericos
58 × 54 mm17 parts2LNo license0
Sub circ de comunicacao
46.3 × 49.8 mm16 parts2LNo license0
Sub Circuito de Alimentação
40.6 × 43.4 mm10 parts2LNo license0
Similar boards
PICPslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7k
PICLens
ervanalb
80 × 80 mm53 parts4LNo license515
PICMicro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414
PICGB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0376
PICGB-MBCTEST
51.4 × 61 mm32 parts2LCC-BY-4.0376
PICGB-BENCH-G1
100 × 100 mm98 parts4LCC-BY-4.0376