HardLabs

PCV MATOME MAIN V5-KICAD 5.0

leevawns·MATOME_CONTROL_BOX·PCB MATOME MAIN V5-KICAD 5.0/PCV MATOME MAIN V5-KICAD 5.0.kicad_pcb

PCV MATOME MAIN V5-KICAD 5.0 PCB layout, top view — open source ESP8266 board by leevawns

About the PCV MATOME MAIN V5-KICAD 5.0 PCB

PCV MATOME MAIN V5-KICAD 5.0 is an open source ESP8266 PCB design by leevawns, published on GitHub. It is a 2-layer board measuring 170 × 95 mm, with 86 components from 31 distinct parts.

Its main chip is the ESP-12F, from the ESP8266 family. Other key parts include the MAX7219, SHIFT_LEVEL_3.3V_5V, LM1117-3.3 and LD1117S50TR_SOT223. By type, the board carries 28 capacitors, 23 connectors, 20 resistors, 6 ICs, 4 diodes and 3 transistors.

From the project

project control box matome for wireharness production at atsi electronics corp.

Main components on the PCV MATOME MAIN V5-KICAD 5.0

MAX7219ESP-12FSHIFT_LEVEL_3.3V_5VLM1117-3.3LD1117S50TR_SOT223

PCV MATOME MAIN V5-KICAD 5.0 bill of materials (BOM)

86 components, 31 distinct parts.

QtyPartRefs
2
MAX7219
U1, U3
1
ESP-12F
U2
1
SHIFT_LEVEL_3.3V_5V
U4
1
LM1117-3.3
U5
1
LD1117S50TR_SOT223
U6
2
BSS138
Q1, Q2
1
2SC1815
Q3
2
Conn_02x08_Odd_Even
J1, J2
2
Conn_01x06
J3, J4
3
Conn_01x08
J5, J6, J10
1
Conn_01x02
J7
1
Conn_01x16
J8
1
Conn_01x04
J9
1
Power
P1
2
Analog
P2, P3
1
Digital
P4
1
PWM
P5
1
PWM
P6
1
Communication
P7
6
CONN_01X01
P8, P9, P10, P11, P12, P13
Show 11 more
QtyPartRefs
1
R_POT
RV1
1
SW_Push
SW1
4
D
D1, D2, D3, D4
24
100n
C1, C2, C3, C4, C5, C6, C7, C8 +16
1
10u
C25
1
10u
C26
2
100u
C27, C28
16
10K
R1, R2, R4, R5, R6, R7, R8, R9 +8
1
20K
R3
1
100
R18
2
R_Network08
RN1, RN2

PCV MATOME MAIN V5-KICAD 5.0 design files

The KiCad project lives in the leevawns/MATOME_CONTROL_BOX repository on GitHub; these links point at the commit this page was built from.

PCV MATOME MAIN V5-KICAD 5.0: common questions

What microcontroller does the PCV MATOME MAIN V5-KICAD 5.0 use?

The PCV MATOME MAIN V5-KICAD 5.0 is built around the ESP-12F, from the ESP8266 family.

How big is the PCV MATOME MAIN V5-KICAD 5.0 PCB?

The PCV MATOME MAIN V5-KICAD 5.0 measures 170 × 95 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCV MATOME MAIN V5-KICAD 5.0?

86 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCV MATOME MAIN V5-KICAD 5.0 design files?

From the leevawns/MATOME_CONTROL_BOX repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the PCV MATOME MAIN V5-KICAD 5.0 design in my own project?

The repository has no license, so all rights stay with leevawns. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCV MATOME MAIN V5-KICAD 5.0 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in MATOME_CONTROL_BOX

Similar boards