Programador de PIC12F629 - shield para Arduino Uno

legendaryredfox·oscr_minimal·tools/pic/shield_uno/hardware/shield_uno.kicad_pcb

Programador de PIC12F629 - shield para Arduino Uno layout, top view — open source PIC board by legendaryredfox

About the Programador de PIC12F629 - shield para Arduino Uno

Programador de PIC12F629 - shield para Arduino Uno is an open source PIC PCB design by legendaryredfox, published on GitHub under the Custom license license. It is a 2-layer board measuring 52.6 × 53.3 mm, with 14 components from 14 distinct parts.

Its main chip is the PIC12F629, from the PIC family. Other key parts include the Uno_R3_Shield. By type, the board carries 4 resistors, 3 diodes, 2 connectors, 1 IC, 1 module and 1 transistor.

It belongs with the dev boards & breakouts and retro computing designs in this gallery.

From the project

Dumper de cartuchos SNES/NES/Famicom/Mega Drive/GBA (shield para Arduino Mega), baseado no OSCR

Grava o PIC12F629 (o CIC "lock" do SNES SA-1, snescic-lock-resync.hex) com um Arduino Uno e o ardpicprog. Resolve o problema de quem não tem PICkit: o 12F629 só grava com Vpp de uns 12 a 13 V no MCLR, e o CH341A não gera isso.

Este shield é o circuito do ardpicprog para o PIC12F629 em DIP-8 direto (a ligação já descrita em ../uno/README.md, D91), desenhado em KiCad. Há três jeitos de montar o mesmo circuito, na ordem de comodidade: A. PCB do shield (este projeto KiCad), B. protoboard, C. placa perfurada.

Programador de PIC12F629 - shield para Arduino Uno, from the project README
From the project README

Main components on the Programador de PIC12F629 - shield para Arduino Uno

PIC12F629Uno_R3_Shield

Programador de PIC12F629 - shield para Arduino Uno bill of materials (BOM)

14 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PIC12F629
U1
1
Uno_R3_Shield
A1
1
BC547
Q1
1
13V
J1
1
ICSP
J2
1
Ponte (padrao: fechada)
JP1
1
1N5819 (DNP)
D1
1
LED vermelho
D2
1
LED amarelo
D3
1
100n
C1
1
10k
R1
1
4k7
R2
1
220
R3
1
1k
R4

Programador de PIC12F629 - shield para Arduino Uno design files

The KiCad project lives in the legendaryredfox/oscr_minimal repository on GitHub; these links point at the commit this page was built from.

Programador de PIC12F629 - shield para Arduino Uno: common questions

What microcontroller does the Programador de PIC12F629 - shield para Arduino Uno use?

The Programador de PIC12F629 - shield para Arduino Uno is built around the PIC12F629, from the PIC family.

How big is the Programador de PIC12F629 - shield para Arduino Uno?

The Programador de PIC12F629 - shield para Arduino Uno measures 52.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Programador de PIC12F629 - shield para Arduino Uno?

14 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Programador de PIC12F629 - shield para Arduino Uno design files?

From the legendaryredfox/oscr_minimal repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Programador de PIC12F629 - shield para Arduino Uno design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Programador de PIC12F629 - shield para Arduino Uno without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in oscr_minimal

Similar boards