Esp32-mini dev board
lenzseg·esp32-mini-dev-board·src/esp32-mini-dev-board.kicad_pcb
About the Esp32-mini dev board
Esp32-mini dev board is an open source ESP32 PCB design by lenzseg, published on GitHub. It is a 4-layer board measuring 30.4 × 38.1 mm, with 30 components from 12 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the USBLC6-2SC6 and AP2112K-3.3. By type, the board carries 11 capacitors, 9 resistors, 3 ICs, 3 connectors, 2 switches and 1 crystal.
It belongs with the dev boards & breakouts and iot & wireless designs in this gallery.
From the project
Compact 4-layer ESP32-C3 dev board with native USB-C, 90 Ω USB routing, ESD/surge protection and JLCPCB-ready outputs. Designed in KiCad 10.
Compact 4-layer ESP32-C3 development board with native USB-C, a 3.3 V LDO, USB ESD/surge protection and breakout headers, designed in KiCad 10 and prepared for JLCPCB fabrication.
A small, low-cost breadboard-friendly board for prototyping with the ESP32-C3 (Wi-Fi + BLE, RISC-V). It is a personal design project that covers the full hardware flow: schematic capture, a custom component library with manufacturer part numbers, 4-layer layout with controlled-impedance USB routing, DFM checks and fabrication outputs.

Main components on the Esp32-mini dev board
Esp32-mini dev board bill of materials (BOM)
30 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U3 |
| 1 | FC-135R 32.7680KA-A3 32.768kHz Seiko Epson Corporation | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | USB4105-GF-A-120 USB_C_Receptacle_USB2.0_16P Global Connector Technology | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 2 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2, J3 |
| 2 | SW_Push | SW_SPST_B3U-1000P | SW1, SW2 |
| 1 | SMAJ5.0A | D_SMA | D1 |
| 8 | GRM188Z71C475KE21D 4.7uF Murata | C_0603_1608Metric | C1, C2, C3, C4, C6, C8, C9, C11 |
| 3 | C | C_0603_1608Metric | C5, C7, C10 |
| 2 | RC0603FR-075K1L R Yageo | R_0603_1608Metric | R1, R2 |
| 7 | R | R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R9 |
Esp32-mini dev board design files
The KiCad project lives in the lenzseg/esp32-mini-dev-board repository on GitHub; these links point at the commit this page was built from.
Esp32-mini dev board: common questions
What microcontroller does the Esp32-mini dev board use?
The Esp32-mini dev board is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the Esp32-mini dev board?
The Esp32-mini dev board measures 30.4 × 38.1 mm, has 4 copper layers and is 1.5842 mm thick.
How many components are on the Esp32-mini dev board?
30 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32-mini dev board design files?
From the lenzseg/esp32-mini-dev-board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32-mini dev board design in my own project?
The repository has no license, so all rights stay with lenzseg. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32-mini dev board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k