Esp-32-gaming console
lewipewi·esp-32-gaming-console·pcb files/handheld.kicad_pcb
About the Esp-32-gaming console PCB
Esp-32-gaming console is an open source ESP32 PCB design by lewipewi, published on GitHub. It is a 4-layer board measuring 99 × 80 mm, with 51 components from 24 distinct parts.
Its main chip is the ESP32-S3-WROOM-1U-N8R8, from the ESP32 family. Other key parts include the TP4056, TPS63020DSJR, SS-12D00-G3, HS24CG003-ARX and MAX98357AETE+T. By type, the board carries 19 capacitors, 16 resistors, 6 ICs, 4 inductors, 2 connectors and 1 transistor.
It belongs with the audio and power & battery designs in this gallery.
From the project
A custom PCB handheld built to run Game Boy games, inspired by the original DMG. Designed from scratch in KiCad — schematic, layout, BOM and firmware.
A custom PCB handheld built to run Game Boy games, inspired by the original DMG. Designed from scratch in KiCad — schematic, layout, BOM and firmware.
ESP32-S3 over ESP32 or S2. The N8R8's 8 MB octal PSRAM is the deciding factor — a Game Boy emulator wants memory bandwidth for framebuffers and audio ring buffers, and octal PSRAM at 80 MHz delivers it. Dual core also means the emulator can own core 1 while USB, SD and audio housekeeping stay on core 0.
Main components on the Esp-32-gaming console
Esp-32-gaming console bill of materials (BOM)
51 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056 TOPPOWER(南京拓微) | C16581_ESOP-8_L4_9-W3_9-P1_27-LS6_0-BL-EP | U1 |
| 1 | TPS63020DSJR TI(德州仪器) | C15483_VSON-14_L4_0-W3_0-P0_50-BL-EP_TI_DSJ | U2 |
| 1 | SS-12D00-G3 SOFNG(硕方) | C22355741_SW-TH_3P-L8_8-W3_9-P2_50_SS12D00G3 | U3 |
| 1 | ESP32-S3-WROOM-1U-N8R8 ESPRESSIF(乐鑫) | C2980300_WIRELM-SMD_ESP32-S3-WROOM-1U | U4 |
| 1 | HS24CG003-ARX HS(汉昇) | C5329583_LCD-SMD_HS24CG003-ARX | U5 |
| 1 | MAX98357AETE+T ADI(亚德诺)/MAXIM(美信) | C910544_TQFN-16_L3_0-W3_0-P0_50-BL-EP1_5 | U6 |
| 1 | DMG2302UK-7 DIODES(美台) | C460977_SOT-23-3_L2_9-W1_3-P1_90-LS2_4-BR | Q1 |
| 2 | B2B-PH-K-S(LF)(SN) JST | C131337_CONN-TH_B2B-PH-K-S | CN1, CN2 |
| 1 | TF-CARD H1.8 SHOU HAN(首韩) | C7529389_TF-SMD_TF-CARD-H1_8 | TF1 |
| 1 | TYPE-C 16PIN 2MD(073) SHOU HAN(首韩) | C2765186_USB-C-SMD_TYPE-C-16PIN-2MD-073 | USB1 |
| 1 | USBLC6-2SC6 ST(意法半导体) | C7519_SOT-23-6_L2_9-W1_6-P0_95-LS2_8-BL | D1 |
| 1 | FTC252012S1R5MBCA cjiang(长江微电) | C5832371_IND-SMD_L2_5-W2_0_MEKK2520TR47M | L1 |
| 3 | 600Ω ±25% @100MHz TDK | C21519_L0805 | L2, L3, L4 |
| 9 | 10UF 10uF | C318691_C0805 | C1, C2, C3, C4, C5, C10, C13, C15 +1 |
| 5 | 0.1UF 0.1uF | C1591_C0603 | C6, C11, C14, C16, C18 |
| 3 | 22UF 22uF | C5672_C1206 | C7, C8, C9 |
| 1 | 1UF 1uF | C29936_C0603 | C12 |
| 1 | 220PF 220pF | C27675_C0603 | C19 |
| 2 | 5.1K 5.1k | C2907044_R0603 | R1, R2 |
| 1 | 1.2K 1.2k | C114605_R0603 | R3 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 1M | C2907003_R0603 | R4, R6, R16 |
| 1 | 180K 180k | C2906999_R0603 | R5 |
| 8 | 10K 10k | C95204_R0603 | R7, R8, R10, R11, R12, R13, R14, R15 |
| 1 | 100 | C2906981_R0603 | R9 |
Esp-32-gaming console design files
The KiCad project lives in the lewipewi/esp-32-gaming-console repository on GitHub; these links point at the commit this page was built from.
Esp-32-gaming console: common questions
What microcontroller does the Esp-32-gaming console use?
The Esp-32-gaming console is built around the ESP32-S3-WROOM-1U-N8R8, from the ESP32 family.
How big is the Esp-32-gaming console PCB?
The Esp-32-gaming console measures 99 × 80 mm, has 4 copper layers and is 1.6458 mm thick.
How many components are on the Esp-32-gaming console?
51 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esp-32-gaming console design files?
From the lewipewi/esp-32-gaming-console repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Esp-32-gaming console design in my own project?
The repository has no license, so all rights stay with lewipewi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp-32-gaming console without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k