7 open source boards using the ESP32-S3-WROOM-1U-N8R8
Real designs built with the ESP32-S3-WROOM-1U-N8R8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Esp32-tv hardware
atomic14
48 × 35.1 mm79 parts4LNo license29ESP32
Controller core reva
itorralbo
141.6 × 135.2 mm187 parts4LMIT0ESP32
Penguin bot
jeevan9s
89.5 × 62.6 mm141 parts4LNo license0ESP32
Esp-32-gaming console
lewipewi
99 × 80 mm51 parts4LNo license0ESP32
Tesla dual lin rev a
lakewoodphone
100 × 56 mm45 parts4LNo license0ESP32
MiniSpeedCam-1.2
Valar-Systems
50 × 50 mm100 parts4LCERN-OHL-S-2.0112ESP32
MiniSpeedCam r1.3
Valar-Systems
50 × 50 mm83 parts4LCERN-OHL-S-2.0112
How designs wire the ESP32-S3-WROOM-1U-N8R8
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP32-S3-WROOM-1U-N8R8 connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin has a capacitor to GND on 6 of 6 designs, most often 1 µF (then 10 µF).
- The EN pin has a pull-up to 3.3V on 6 of 6 designs, most often 10 kΩ (then 5.1 kΩ).
- The 3V3 pin is tied to 3.3V on 6 of 6 designs.
- The IO35 pin is left unconnected on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 40, 41 | Connected to: GND 94% | — |
| 3V3pin 2 | Connected to: 3.3V 100% | — |
| ENpin 3 | Connected to: Signal 100% |
|
| IO4pin 4 | Connected to: A connector 50% · VBATT_SENSE 17% |
|
| IO5pin 5 | Connected to: A connector 50% |
|
| IO6pin 6 | Connected to: A connector 50% |
|
| IO7pin 7 | Connected to: A connector 33% |
|
| IO15pin 8 | Connected to: A connector 50% · not connected 17% |
|
| IO46pin 16 | Connected to: Not connected 83% · a signal 17% | — |
| IO12pin 20 | Connected to: A connector 33% · not connected 17% |
|
| IO47pin 24 | Connected to: Signal 67% · not connected 33% |
|
| IO48pin 25 | Connected to: Signal 67% · not connected 33% |
|
| IO45pin 26 | Connected to: Not connected 83% · a signal 17% | — |
| IO0pin 27 | Connected to: Signal 100% |
|
| IO35pin 28 | Connected to: Not connected 100% | — |
| IO36pin 29 | Connected to: Not connected 100% | — |
| IO37pin 30 | Connected to: Not connected 100% | — |
| IO2pin 38 | Connected to: Signal 83% · not connected 17% |
|
| IO1pin 39 | Connected to: Signal 67% · not connected 33% |
|
20 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MiniSpeedCam-1.2 by Valar-Systems, Esp32-tv hardware by atomic14, Controller core reva by itorralbo and Penguin bot by jeevan9s.
The ESP32-S3-WROOM-1U-N8R8 in open source designs
The gallery holds 7 open source boards using the ESP32-S3-WROOM-1U-N8R8 from 6 GitHub repositories; a typical one measures about 89.5 × 56 mm and carries around 83 components.
100% use four copper layers or more, and 43% carry an open source license.
The most starred is MiniSpeedCam-1.2 by Valar-Systems.
Parts used alongside the ESP32-S3-WROOM-1U-N8R8
Microcontrollers on boards using the ESP32-S3-WROOM-1U-N8R8
What boards using the ESP32-S3-WROOM-1U-N8R8 are built for
ESP32-S3-WROOM-1U-N8R8: common questions
Where can I find a ESP32-S3-WROOM-1U-N8R8 reference design?
Each of the 7 boards on this page is a real design using the ESP32-S3-WROOM-1U-N8R8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-S3-WROOM-1U-N8R8 EN pin connected?
The EN pin has a capacitor to GND on 6 of 6 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-WROOM-1U-N8R8.
How is the ESP32-S3-WROOM-1U-N8R8 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-WROOM-1U-N8R8.
How is the ESP32-S3-WROOM-1U-N8R8 IO35 pin connected?
The IO35 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-WROOM-1U-N8R8.
Which microcontrollers do boards using the ESP32-S3-WROOM-1U-N8R8 use?
Most are built on ESP32 (7).
How big is a typical board using the ESP32-S3-WROOM-1U-N8R8?
The median is 89.5 × 56 mm, and 0% are two-layer designs.
What is the most popular open source board using the ESP32-S3-WROOM-1U-N8R8?
By GitHub stars, MiniSpeedCam-1.2 by Valar-Systems, with 112 stars.
Can I simulate one of these boards using the ESP32-S3-WROOM-1U-N8R8 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.