First try
liubo817·Diplomna-Rabota·Hardware/Boards/V1 - 2 boards/Main_board/First_try.kicad_pcb
About the First try PCB
First try is an open source ESP32 PCB design by liubo817, published on GitHub. It is a 2-layer board measuring 105.7 × 59.7 mm, with 7 components from 6 distinct parts.
Its main chip is the Olimex esp32, from the ESP32 family. Other key parts include the DS18B20, Water level and SEN0189 Turbidity_sensor. By type, the board carries 4 ICs, 2 connectors and 1 resistor.

Main components on the First try
First try bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Olimex esp32 | MODULE_ESP32-DEVKITC | U1 |
| 1 | DS18B20 | DS18B20_3dmodel | U2 |
| 1 | Water level | DS18B20_3dmodel | U3 |
| 1 | SEN0189 Turbidity_sensor | DS18B20_3dmodel | U6 |
| 2 | Conn_01x03_Pin | connector_3p | J1, J2 |
| 1 | 2.2k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
First try design files
The KiCad project lives in the liubo817/Diplomna-Rabota repository on GitHub; these links point at the commit this page was built from.
First try: common questions
What microcontroller does the First try use?
The First try is built around the Olimex esp32, from the ESP32 family.
How big is the First try PCB?
The First try measures 105.7 × 59.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the First try?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the First try design files?
From the liubo817/Diplomna-Rabota repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the First try design in my own project?
The repository has no license, so all rights stay with liubo817. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the First try without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Diplomna-Rabota
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k