BTK-0

lnvke·DH-BTK-0·PCB/BTK-0.kicad_pcb

BTK-0 PCB layout, top view — open source ESP32 board by lnvke

About the BTK-0 PCB

BTK-0 is an open source ESP32 PCB design by lnvke, published on GitHub. It is a 4-layer board measuring 139.5 × 105 mm, with 102 components from 51 distinct parts.

Its main chip is the ESP32-C6-MINI-1, from the ESP32 family. Other key parts include the NCP1117-3.3_SOT223, USBLC6-2SC6, TVS1400DRV and BQ24075RGT. By type, the board carries 35 diodes, 34 switches, 15 resistors, 9 capacitors, 5 ICs and 4 connectors.

It belongs with the iot & wireless and keyboards designs in this gallery.

From the project

Bluetooth keyboard HID device.

Made this so I can have a wireless keyboard while practicing with ESP-IDF BLE. Split would have given me the opportunity to work with peripheral bluetooth and non-HID communications, something I have never done before.

This is a custom integrated ESP32-C6 SoM based split keyboard using RMK rust mechanical keyboard firmware. Because Zephyr RTOS support for the ESP32-C6 is limited, ZMK firmware is not a viable choice for this project, as the HID (human interface) over GATT protocol has been documented to have conflicts between NimBLE and proprietary Espressif BLE controllers. RMK uses TrouBLE…

BTK-0, from the project README
From the project README

Main components on the BTK-0

BTK-0 bill of materials (BOM)

102 components, 51 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NCP1117-3.3_SOT223
U1
1
USBLC6-2SC6
U2
1
ESP32-C6-MINI-1
U3
1
TVS1400DRV
U4
1
BQ24075RGT
U5
1
USB_C_Receptacle_USB2.0_16P
J1
1
Battery
J2
1
Conn_01x16_Pin
J3
1
CONN_01X16_SOCKET
Conn_01x16_Socket
J4
2
SW_SPDT
SW1, SW2
1
EN
SW3
1
BOOT
SW4
1
1,1
SW6
1
2,1
SW7
1
3,1
SW8
1
4,1
SW9
1
5,1
SW10
1
6,1
SW11
1
1,2
SW12
1
2,2
SW13
Show 31 more
QtyPartRefs
1
3,2
SW14
1
4,2
SW15
1
5,2
SW16
1
6,2
SW17
1
1,3
SW18
1
2,3
SW19
1
3,3
SW20
1
4,3
SW21
1
5,3
SW22
1
6,3
SW23
2
1,4
SW24, SW30
2
2,4
SW25, SW31
2
3,4
SW26, SW32
2
4,4
SW27, SW33
2
5,4
SW28, SW34
2
6,4
SW29, SW35
2
LED
D1, D2
1
MODE_IND
D3
1
BOOT_IND
D4
1
TXRX_IND
D5
30
D
D6, D7, D8, D9, D10, D11, D12, D13 +22
3
10u
C1, C2, C7
3
100n
C3, C4, C5
3
4.7u
C6, C8, C9
2
5k1
R1, R2
5
10k
R3, R4, R5, R6, R8
1
27k
R7
1
1.5k
R9
2
1k
R10, R12
1
4.7k
R11
3
470
R13, R14, R15

BTK-0 design files

The KiCad project lives in the lnvke/DH-BTK-0 repository on GitHub; these links point at the commit this page was built from.

BTK-0: common questions

What microcontroller does the BTK-0 use?

The BTK-0 is built around the ESP32-C6-MINI-1, from the ESP32 family.

How big is the BTK-0 PCB?

The BTK-0 measures 139.5 × 105 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the BTK-0?

102 components, from 51 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the BTK-0 design files?

From the lnvke/DH-BTK-0 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the BTK-0 design in my own project?

The repository has no license, so all rights stay with lnvke. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the BTK-0 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in DH-BTK-0

Similar boards