RIGHTCONTROL

lnvke·DH-BTK-0·CAD SPLIT/RIGHT/subassembly/RIGHTCONTROL.kicad_pcb

RIGHTCONTROL PCB layout, top view — open source ESP32 board by lnvke

About the RIGHTCONTROL PCB

RIGHTCONTROL is an open source ESP32 PCB design by lnvke, published on GitHub. It is a 4-layer board measuring 22.6 × 81.9 mm, with 41 components from 25 distinct parts.

Its main chip is the ESP32-C6-MINI-1, from the ESP32 family. Other key parts include the NCP1117-3.3_SOT223, USBLC6-2SC6, TVS1400DRV and BQ24075RGT. By type, the board carries 15 resistors, 9 capacitors, 5 ICs, 5 diodes, 4 switches and 3 connectors.

It belongs with the iot & wireless and keyboards designs in this gallery.

From the project

Bluetooth keyboard HID device.

Made this so I can have a wireless keyboard while practicing with ESP-IDF BLE. Split would have given me the opportunity to work with peripheral bluetooth and non-HID communications, something I have never done before.

This is a custom integrated ESP32-C6 SoM based split keyboard using RMK rust mechanical keyboard firmware. Because Zephyr RTOS support for the ESP32-C6 is limited, ZMK firmware is not a viable choice for this project, as the HID (human interface) over GATT protocol has been documented to have conflicts between NimBLE and proprietary Espressif BLE controllers. RMK uses TrouBLE…

RIGHTCONTROL, from the project README
From the project README

Main components on the RIGHTCONTROL

RIGHTCONTROL bill of materials (BOM)

41 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NCP1117-3.3_SOT223
U1
1
USBLC6-2SC6
U2
1
ESP32-C6-MINI-1
U3
1
TVS1400DRV
U4
1
BQ24075RGT
U5
1
USB_C_Receptacle_USB2.0_16P
J1
1
Battery
J2
1
Conn_01x16_Pin
J3
2
SW_SPDT
SW1, SW2
1
EN
SW3
1
BOOT
SW4
2
LED
D1, D2
1
MODE_IND
D3
1
BOOT_IND
D4
1
TXRX_IND
D5
3
10u
C1, C2, C7
3
100n
C3, C4, C5
3
4.7u
C6, C8, C9
2
5k1
R1, R2
5
10k
R3, R4, R5, R6, R8
Show 5 more
QtyPartRefs
1
27k
R7
1
1.5k
R9
2
1k
R10, R12
1
4.7k
R11
3
470
R13, R14, R15

RIGHTCONTROL design files

The KiCad project lives in the lnvke/DH-BTK-0 repository on GitHub; these links point at the commit this page was built from.

RIGHTCONTROL: common questions

What microcontroller does the RIGHTCONTROL use?

The RIGHTCONTROL is built around the ESP32-C6-MINI-1, from the ESP32 family.

How big is the RIGHTCONTROL PCB?

The RIGHTCONTROL measures 22.6 × 81.9 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the RIGHTCONTROL?

41 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RIGHTCONTROL design files?

From the lnvke/DH-BTK-0 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the RIGHTCONTROL design in my own project?

The repository has no license, so all rights stay with lnvke. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RIGHTCONTROL without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in DH-BTK-0

Similar boards