HalfLife

lockerkey25·HalfLife·Starbie/Starbie.kicad_pcb

HalfLife PCB layout, top view — open source ESP32 board by lockerkey25

About the HalfLife PCB

HalfLife is an open source ESP32 PCB design by lockerkey25, published on GitHub. It is a 2-layer board measuring 44.5 × 36.5 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

My first hardware project, Starbie! It is a tiny motion-controlled digital pet / a desktop Tamagotchi-style companion that lives on a compact PCB. Instead of mashing buttons, you interact with it mostly by physically moving the board.

My first hardware project, Starbie! It is a tiny motion-controlled digital pet / a desktop Tamagotchi-style companion that lives on a compact PCB. Instead of mashing buttons, you interact with it mostly by physically moving the board.

This is my build of the Half-Life Week 1 beginner project. The hardware design and renders in this repo are based on the original Starbie reference project by SharKingStudios.

HalfLife, from the project README
From the project README

Main components on the HalfLife

HalfLife bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
DHT11
U1
1
XIAO-ESP32-C3-SMD
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10k
R1

HalfLife design files

The KiCad project lives in the lockerkey25/HalfLife repository on GitHub; these links point at the commit this page was built from.

HalfLife: common questions

What microcontroller does the HalfLife use?

The HalfLife is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the HalfLife PCB?

The HalfLife measures 44.5 × 36.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HalfLife?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the HalfLife design files?

From the lockerkey25/HalfLife repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the HalfLife design in my own project?

The repository has no license, so all rights stay with lockerkey25. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HalfLife without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards