ACNode-Shield
About the ACNode-Shield
ACNode-Shield is an open source PCB design by londonhackspace, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 15 components from 15 distinct parts.
Other key parts include the SRD-05VDC-SL-C and WS2812B. By type, the board carries 7 connectors, 2 ICs, 2 switches, 1 transistor, 1 diode and 1 capacitor.
It belongs with the dev boards & breakouts and power & battery designs in this gallery.
From the project
ACnode using a Connected Launchpad
Over the years the design of the ACnodes and doorbots have been gradually improved.
As of 2021-10-28, all acnodes and doorbots in London Hackspace have been using the 'New-ACNode-Doorbot-Shield' designs. This is a single PCB designed to fit underneath a TI Tiva C XL Connected Launchpad microcrontroller board EK-TM4C1294XL EVAL BRD, TIVA C CONNECTED LAUNCHPAD. The Launchpad boards are normally available from Farnell and RS.
Main components on the ACNode-Shield
ACNode-Shield bill of materials (BOM)
15 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SRD-05VDC-SL-C | Relay_SANYOU_SRD_Series_Form_C | U1 |
| 1 | WS2812B | WS2812b | U2 |
| 1 | PN2222A | TO-92_Inline_Wide | Q1 |
| 1 | MICRO_SD_HINGE | MicroSD_Slot | J1 |
| 1 | CONN_NFC | Pin_Header_Straight_1x04 | P1 |
| 1 | CONN_RELAY | TerminalBlock_Pheonix_MKDS1.5-3pol | P2 |
| 1 | CONN_RGB_LED | Pin_Header_Straight_1x04 | P3 |
| 1 | CONN_X6 | Socket_Strip_Straight_2x10 | P4 |
| 1 | CONN_X7 | Socket_Strip_Straight_2x10 | P5 |
| 1 | CONN_WS2812 | Pin_Header_Straight_1x03 | P6 |
| 1 | SW_RST | SW_PUSH_SMALL | SW1 |
| 1 | SW_BTN | Socket_Strip_Straight_1x02 | SW2 |
| 1 | 1N4007 | Diode_DO-41_SOD81_Horizontal_RM10 | D1 |
| 1 | C_Small | C_1206 | C1 |
| 1 | 1k | Resistor_Horizontal_RM10mm | R1 |
ACNode-Shield design files
The KiCad project lives in the londonhackspace/acnode-cl repository on GitHub; these links point at the commit this page was built from.
ACNode-Shield: common questions
How big is the ACNode-Shield?
The ACNode-Shield measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ACNode-Shield?
15 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the ACNode-Shield design files?
From the londonhackspace/acnode-cl repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ACNode-Shield design in my own project?
The repository has no license, so all rights stay with londonhackspace. Use it as a reference, and ask the author before reusing the design.
More boards in acnode-cl
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Eecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k