ClockClock24

Loredati-svg·ClockClock24·Hardware/Controller/ClockClock24.kicad_pcb

ClockClock24 PCB layout, top view — open source ESP32 board by Loredati-svg

About the ClockClock24 PCB

ClockClock24 is an open source ESP32 PCB design by Loredati-svg, published on GitHub. It is a 4-layer board measuring 78.9 × 51 mm, with 41 components from 27 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the USBLC6-2SC6, AP7361C-33E and VID6606. By type, the board carries 12 capacitors, 11 resistors, 7 connectors, 5 ICs, 3 diodes and 2 switches.

It belongs with the robotics & motion and iot & wireless designs in this gallery.

From the project

ClockClock 24 replica: 24 analog clocks showing digital time. ESP32-S3 controllers with VID6606 stepper drivers, auto-addressed I2C bus and VID28-05 dual-shaft motors. KiCad 10.

A personal re-implementation of the ClockClock 24 kinetic sculpture by Humans Since 1982: 24 analog clocks in a 3 × 8 grid whose hands move together to show the time in digital form.

Inspired by Vallasc/clockclock24-replica, with a redesigned architecture: ESP32-S3 controllers, USB-C on every board, an auto-addressed I2C bus and separate motor boards.

6 identical controller boards (2 per row), each driving 4 clocks (8 motors) via cables to 24 passive motor boards, one behind each clock.

ClockClock24, from the project README
From the project README

Main components on the ClockClock24

ClockClock24 bill of materials (BOM)

41 components, 27 distinct parts.

QtyPartRefs
1
USBLC6-2SC6
U1
1
ESP32-S3-WROOM-1
U2
1
AP7361C-33E
U3
2
VID6606
U4, U5
1
USB_C_Receptacle_USB2.0_16P
J1
1
BUS_IN
J2
1
BUS_OUT
J3
1
CLK1
J4
1
CLK3
J5
1
CLK2
J6
1
CLK4
J7
1
Polyfuse
F1
2
SW_Push
SW1, SW2
1
SS54
MDD(Microdiode Electronics)
D1
1
SMAJ5.0A
D2
1
LED
D3
1
10u
C1
5
100n
C2, C7, C8, C9, C10
2
1u
C3, C12
2
4u7
C4, C5
Show 7 more
QtyPartRefs
2
100u
C6, C11
2
5k1
R1, R2
4
10k
R3, R4, R5, R14
1
100k
R9
1
330
R10
1
1k
R11
2
4k7
R12, R13

ClockClock24 design files

The KiCad project lives in the Loredati-svg/ClockClock24 repository on GitHub; these links point at the commit this page was built from.

ClockClock24: common questions

What microcontroller does the ClockClock24 use?

The ClockClock24 is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the ClockClock24 PCB?

The ClockClock24 measures 78.9 × 51 mm, has 4 copper layers and is 1.5982 mm thick.

How many components are on the ClockClock24?

41 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the ClockClock24 design files?

From the Loredati-svg/ClockClock24 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ClockClock24 design in my own project?

The repository has no license, so all rights stay with Loredati-svg. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ClockClock24 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards