Spycam miniproject

lowojoandro·spycam_miniproject·hardware/kicad/spycam_2.kicad_pcb

Spycam miniproject PCB layout, top view — open source ESP32 board by lowojoandro

About the Spycam miniproject PCB

Spycam miniproject is an open source ESP32 PCB design by lowojoandro, published on GitHub. It is a 4-layer board measuring 78 × 68 mm, with 50 components from 26 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the USBLC6-2SC6, MCP73831-2-OT, MAX604 and EMMC08G-MB29-PM9B. By type, the board carries 17 capacitors, 17 resistors, 5 ICs, 4 switches, 2 connectors and 2 diodes.

It belongs with the power & battery designs in this gallery.

From the project

This mini project is a custom PCB for a battery powered recording camera using an ESP32-S3. The download to the files are in the hardware folder. The firmware folder contains the code for the ESP32, camera, buttons, and storage.

This mini project is a custom PCB for a battery powered recording camera using an ESP32-S3. The download to the files are in the hardware folder. The firmware folder contains the code for the ESP32, camera, buttons, and storage.

**Note: I did not work on the firmware side yet, partly because I'd like to actually have the PCB first before I start coding.

- Camera recording support - Minimum 480p at 30 FPS - microSD card storage - eMMC support - Start/stop recording button - Target BOM cost under $25 - Must pass ERC and DRC in KiCad

Spycam miniproject, from the project README
From the project README

Main components on the Spycam miniproject

Spycam miniproject bill of materials (BOM)

50 components, 26 distinct parts.

QtyPartRefs
1
USBLC6-2SC6
U1
1
MCP73831-2-OT
U2
1
MAX604
U3
1
ESP32-S3-WROOM-1
U4
1
EMMC08G-MB29-PM9B
U5
1
FDN340P
Q1
1
USB_C_Receptacle_USB2.0_16P
J1
1
Micro_SD_Card_Det1
J2
1
Battery_Cell
BT1
1
OV2640
CAM1
1
SW_SPST
SW1
3
SW_Push
SW2, SW3, SW4
1
PESD5V0L1ULD
D1
1
LED
D2
3
4u7
C1, C2, C4
5
4.7uF
C3, C7, C11, C14, C16
2
10uF
C5, C6
7
100nF
C8, C9, C10, C12, C13, C15, C18
2
5000
R1, R2
1
0
R3
Show 6 more
QtyPartRefs
1
2k
R4
1
470R
R5
1
25k
R6
8
10k
R7, R9, R10, R11, R12, R13, R14, R15
1
100R
R8
2
4.7k
R16, R17

Spycam miniproject design files

The KiCad project lives in the lowojoandro/spycam_miniproject repository on GitHub; these links point at the commit this page was built from.

Spycam miniproject: common questions

What microcontroller does the Spycam miniproject use?

The Spycam miniproject is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Spycam miniproject PCB?

The Spycam miniproject measures 78 × 68 mm, has 4 copper layers and is 1 mm thick.

How many components are on the Spycam miniproject?

50 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Spycam miniproject design files?

From the lowojoandro/spycam_miniproject repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Spycam miniproject design in my own project?

The repository has no license, so all rights stay with lowojoandro. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Spycam miniproject without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards