Ampere
LtBrain·Ampere·ampere/ampere.kicad_pcb
About the Ampere PCB
Ampere is an open source STM32 PCB design by LtBrain, published on GitHub under the MIT license. It is a 4-layer board measuring 100 × 65 mm, with 208 components from 79 distinct parts.
Its main chip is the STM32G474RETX, from the STM32 family. Other key parts include the USBLC6-2P6, TPS26750SRSMR, TPD4S480RUKR, CAT24C256 and TPS55289. By type, the board carries 100 capacitors, 59 resistors, 18 ICs, 11 connectors, 7 transistors and 7 diodes.
It belongs with the power & battery designs in this gallery.
From the project
A variable benchtop power supply
This board was created with the intention of streamlining PCB workflows at home without spending that much money on a laboratory grade power supply. It adds features such as USB communication so that a standard PC can talk to this board and monitor outputs while also changing them and providing some waveform generation.
Ampere relies on a STM32G474 chip to orchestrate and control all the power path devices via I2C. This is very useful because it allows a single pair of traces to practically talk with the entire board. However, Ampere does use 3 I2C channels for increased reliability and just…
Main components on the Ampere
Ampere bill of materials (BOM)
208 components, 79 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2P6 | SOT-666 | U1 |
| 1 | STM32G474RETX STM32G474RETx | LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | TPS26750SRSMR | VQFN32_RSM_TEX-L | U3 |
| 1 | TPD4S480RUKR | RUK0020B-IPC_C | U4 |
| 1 | CAT24C256 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 2 | TPS55289 | CONV_TPS552892RYQR | U6, U8 |
| 2 | MIC29302WU | TO-263-5_ET_DDPAK_MCH | U7, U9 |
| 2 | MCP4725XXX-XCH MCP4725xxx-xCH | SOT-23-6 | U11, U15 |
| 4 | INA238 | TSSOP-10_3x3mm_P0.5mm | U13, U14, U18, U19 |
| 1 | LM74502DDFR | SOT65P280X110-8N | U21 |
| 1 | LMR36520ADDA | Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U22 |
| 1 | TPS7A91 | Texas_S-PDSO-N10_EP1.2x2mm | U23 |
| 2 | BSC040N08NS5 | TDSON-8-1 | Q1, Q12 |
| 2 | CSD17484F4 | DFN100X60X35-3N | Q6, Q7 |
| 1 | CSD18543Q3A | VSON-8_3.3x3.3mm_P0.65mm_NexFET | Q8 |
| 2 | AO4485 | SOIC-8_3.9x4.9mm_P1.27mm | Q9, Q10 |
| 1 | 25 MHZ | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 32.768 KHZ | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 2 | USB_C_Receptacle | JAE_DX07S024JJ2R1300 | J1, J2 |
| 1 | BUCK2+ | SolderWirePad_1x01_SMD_4x8mm | J3 |
Show 59 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2x12 IDC | IDC-Header_2x12_P2.54mm_Vertical | J5 |
| 1 | BUCK2- | SolderWirePad_1x01_SMD_4x8mm | J6 |
| 1 | BUCK1+ | SolderWirePad_1x01_SMD_4x8mm | J7 |
| 1 | BUCK1- | SolderWirePad_1x01_SMD_4x8mm | J8 |
| 1 | LDO1_VOUT | SolderWirePad_1x01_SMD_1.5x3mm | J9 |
| 1 | LDO1_GND | SolderWirePad_1x01_SMD_1.5x3mm | J10 |
| 1 | LDO2_VOUT | SolderWirePad_1x01_SMD_1.5x3mm | J11 |
| 1 | LDO2_GND | SolderWirePad_1x01_SMD_1.5x3mm | J12 |
| 1 | BLUE | LED_0402_1005Metric | D1 |
| 2 | RED | LED_0603_1608Metric | D2, D3 |
| 2 | 10V | D_SOD-323 | D5, D7 |
| 2 | SMBJ24CA | D_SMB | D6, D8 |
| 1 | 22 ohm | L_0805_2012Metric | FB1 |
| 2 | 4.7UH 4.7uH | L_Changjiang_FXL1360 | L1, L2 |
| 1 | 12UH 12uH | L_Changjiang_FNR6040S | L4 |
| 35 | 100NF 100nF | C_0402_1005Metric | C1, C9, C11, C12, C13, C14, C21, C24 +27 |
| 1 | 470NF 470nF | C_0402_1005Metric | C2 |
| 1 | 4.7UF 4.7uF | C_0805_2012Metric | C3 |
| 4 | 10NF 10nF | C_0603_1608Metric | C4, C5, C6, C7 |
| 4 | 10UF 10uF | C_0402_1005Metric | C8, C28, C29, C30 |
| 4 | 10UF 10uF | C_0603_1608Metric | C10, C27, C127, C128 |
| 1 | 220UF 220uF | CP_Elec_8x10 | C15 |
| 4 | 18PF 18pF | C_0402_1005Metric | C17, C18, C19, C20 |
| 2 | 220PF 220pF | C_0402_1005Metric | C22, C23 |
| 7 | 1UF 1uF | C_0603_1608Metric | C35, C43, C52, C58, C71, C77, C125 |
| 12 | 10UF 10uF | C_1206_3216Metric | C36, C37, C38, C44, C45, C56, C57, C72 +4 |
| 2 | 4.7UF 4.7uF | C_0603_1608Metric | C46, C59 |
| 3 | 10NF 10nF | C_0402_1005Metric | C47, C60, C126 |
| 2 | 4700PF 4700pF | C_0402_1005Metric | C48, C66 |
| 2 | 100PF 100pF | C_0402_1005Metric | C49, C67 |
| 2 | 68UF 68uF | CP_Elec_8x10 | C50, C55 |
| 2 | 100UF 100uF | CP_Elec_6.3x5.8 | C51, C76 |
| 1 | 220NF 220nF | C_0603_1608Metric | C104 |
| 2 | 100NF 100nF | C_0603_1608Metric | C115, C118 |
| 2 | 10UF 10uF | CP_EIA-3528-21_Kemet-B | C116, C117 |
| 3 | 22UF 22uF | C_1210_3225Metric | C119, C120, C121 |
| 2 | 4.7UF 4.7uF | C_1210_3225Metric | C122, C123 |
| 1 | 220NF 220nF | C_0805_2012Metric | C124 |
| 1 | 2.2UF 2.2uF | C_1210_3225Metric | C130 |
| 10 | 2.2K | R_0402_1005Metric | R1, R2, R4, R5, R84, R85, R86, R87 +2 |
| 4 | 10K | R_0402_1005Metric | R3, R6, R14, R72 |
| 7 | 100K | R_0402_1005Metric | R7, R15, R28, R29, R37, R41, R78 |
| 2 | 5.1K | R_0402_1005Metric | R12, R13 |
| 2 | 0 | R_0402_1005Metric | R20, R27 |
| 6 | 10M 10m | R_1206_3216Metric | R30, R38, R48, R50, R67, R71 |
| 8 | 10 | R_0402_1005Metric | R31, R32, R39, R40, R46, R47, R49, R51 |
| 2 | 49.9K | R_0402_1005Metric | R33, R42 |
| 2 | 150K | R_0402_1005Metric | R34, R43 |
| 2 | 27.4K | R_0402_1005Metric | R35, R44 |
| 2 | 2.2K | R_0603_1608Metric | R36, R45 |
| 2 | 9.2K | R_0603_1608Metric | R63, R68 |
| 2 | 1K | R_0603_1608Metric | R64, R69 |
| 2 | 1.56K | R_0603_1608Metric | R65, R70 |
| 1 | 10K | C_0402_1005Metric | R66 |
| 1 | 4K | R_0402_1005Metric | R79 |
| 1 | 100K | R_0603_1608Metric | R80 |
| 1 | 38.2K | R_0603_1608Metric | R81 |
| 1 | 100K | C_0402_1005Metric | R82 |
| 1 | 32.4K | C_0402_1005Metric | R83 |
Ampere design files
The KiCad project lives in the LtBrain/Ampere repository on GitHub; these links point at the commit this page was built from.
Ampere: common questions
What microcontroller does the Ampere use?
The Ampere is built around the STM32G474RETX, from the STM32 family.
How big is the Ampere PCB?
The Ampere measures 100 × 65 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Ampere?
208 components, from 79 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ampere design files?
From the LtBrain/Ampere repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ampere design in my own project?
Yes, under the terms of its MIT license, which LtBrain chose for the repository.
Can I test firmware for the Ampere without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k