8 open source boards using the LM74502DDFR

Real designs built with the LM74502DDFR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the LM74502DDFR

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LM74502DDFR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCAP_4 pin has a capacitor to the supply on 6 of 7 designs, most often 100 nF (then 220 nF).
  • The OV_7 pin has a resistor to GND on 6 of 7 designs, most often 100 kΩ (then 10 kΩ).
  • The NC_3 pin is left unconnected on 7 of 7 designs.
  • The OV_7 pin has a pull-up to VBUS_LSW on 5 of 7 designs, most often 422 kΩ (then 100 kΩ).
EN_1pin 1Connected to: Signal 86%
  • Resistor to GND on 57% · 47 kΩ (2), 100 kΩ (1), 6.04 kΩ (1)
  • Series resistor on 43% · 10 kΩ (2), 100 kΩ (1)
GND_2pin 2Connected to: GND 100%
NC_3pin 3Connected to: Not connected 100%
VCAP_4pin 4Connected to: Signal 100%
  • Capacitor to the supply on 86% · 100 nF (3), 220 nF (3)
VS_5pin 5Connected to: VBUS_LSW 86%
  • Capacitor on 100% · 100 nF (4), 220 nF (3)
  • Decoupling capacitor on 43% · 100 nF (3)
OV_7pin 7Connected to: Signal 86%
  • Resistor to GND on 86% · 100 kΩ (3), 10 kΩ (1), 4 kΩ (1)
  • Pull-up to VBUS_LSW on 71% · 422 kΩ (2), 100 kΩ (2), 390 kΩ (1)
SRC_8pin 8Connected to: TPS259470ARPWR 29%
  • Series resistor on 43% · 40.2 kΩ (2), 121 kΩ (2), 100 kΩ (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Iasis by hydazz, Odeck by KarpelesLab, Odock by KarpelesLab and Ampere by LtBrain.

The LM74502DDFR in open source designs

The gallery holds 8 open source boards using the LM74502DDFR from 7 GitHub repositories; a typical one measures about 130 × 95 mm and carries around 269 components.

63% use four copper layers or more, and 50% carry an open source license.

The most starred is Odeck by KarpelesLab.

Microcontrollers on boards using the LM74502DDFR

What boards using the LM74502DDFR are built for

LM74502DDFR: common questions

Where can I find a LM74502DDFR reference design?

Each of the 8 boards on this page is a real design using the LM74502DDFR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LM74502DDFR VCAP_4 pin connected?

The VCAP_4 pin has a capacitor to the supply on 6 of 7 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 7 open source designs using the LM74502DDFR.

What resistor goes on the LM74502DDFR OV_7 pin?

The OV_7 pin has a resistor to GND on 6 of 7 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the LM74502DDFR.

How is the LM74502DDFR NC_3 pin connected?

The NC_3 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the LM74502DDFR.

What parts are used alongside the LM74502DDFR?

The TPD4S480RUKR, TPS26750SRSMR, USB7206CT/KDX, 74LVC1G17W5-7 and AT24C512C-SSHD-T appear in the most repositories here.

Which microcontrollers do boards using the LM74502DDFR use?

Most are built on RP2040/RP2350 (3), Raspberry Pi (1) and STM32 (1).

How big is a typical board using the LM74502DDFR?

The median is 130 × 95 mm, and 38% are two-layer designs.

What is the most popular open source board using the LM74502DDFR?

By GitHub stars, Odeck by KarpelesLab, with 0 stars.

Can I simulate one of these boards using the LM74502DDFR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part