HardLabs

8FilPilotes

LudovicLemarinel·EspHomeAutomation·Hardware/8FilPilotes/8FilPilotes.kicad_pcb

8FilPilotes PCB layout, top view — open source ESP8266 board by LudovicLemarinel

About the 8FilPilotes PCB

8FilPilotes is an open source ESP8266 PCB design by LudovicLemarinel, published on GitHub. It is a 2-layer board measuring 45 × 40 mm, with 10 components from 7 distinct parts.

Its main chip is the ESP-12F, from the ESP8266 family. Other key parts include the AMS1117. By type, the board carries 3 connectors, 3 resistors, 2 ICs and 2 capacitors.

It belongs with the iot & wireless designs in this gallery.

From the project

Home Automation based on ESP8266 and MQTT

Main components on the 8FilPilotes

AMS1117ESP-12F

8FilPilotes bill of materials (BOM)

10 components, 7 distinct parts.

QtyPartRefs
1
AMS1117
U1
1
ESP-12F
U2
1
Conn_01x04_Male
J1
1
Conn_02x03_Odd_Even
J2
1
5VIN
P1
2
10uF
C1, C2
3
10k
R1, R17, R18

8FilPilotes design files

The KiCad project lives in the LudovicLemarinel/EspHomeAutomation repository on GitHub; these links point at the commit this page was built from.

8FilPilotes: common questions

What microcontroller does the 8FilPilotes use?

The 8FilPilotes is built around the ESP-12F, from the ESP8266 family.

How big is the 8FilPilotes PCB?

The 8FilPilotes measures 45 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 8FilPilotes?

10 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the 8FilPilotes design files?

From the LudovicLemarinel/EspHomeAutomation repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the 8FilPilotes design in my own project?

The repository has no license, so all rights stay with LudovicLemarinel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 8FilPilotes without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in EspHomeAutomation

Similar boards