FilPilote
About the FilPilote PCB
FilPilote is an open source ESP8266 PCB design by LudovicLemarinel, published on GitHub. It is a 2-layer board measuring 50 × 40 mm, with 14 components from 9 distinct parts.
Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the MOC3041M and HLK-PM03. By type, the board carries 5 resistors, 4 ICs, 2 connectors, 2 diodes and 1 capacitor.
It belongs with the iot & wireless designs in this gallery.
From the project
Home Automation based on ESP8266 and MQTT
Main components on the FilPilote
FilPilote bill of materials (BOM)
14 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MOC3041M | DIP-6_W7.62mm_LongPads | U1, U2 |
| 1 | ESP-12E | ESP-12E | U4 |
| 1 | HLK-PM03 | HLK-PM01 | U5 |
| 1 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | CONN_01X03 | TerminalBlock_bornier-3_P5.08mm | P1 |
| 2 | D | D_SOD-123 | D1, D2 |
| 1 | 100nF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3 |
| 2 | 270 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 3 | 10K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R7, R8 |
FilPilote design files
The KiCad project lives in the LudovicLemarinel/EspHomeAutomation repository on GitHub; these links point at the commit this page was built from.
FilPilote: common questions
What microcontroller does the FilPilote use?
The FilPilote is built around the ESP-12E, from the ESP8266 family.
How big is the FilPilote PCB?
The FilPilote measures 50 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FilPilote?
14 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the FilPilote design files?
From the LudovicLemarinel/EspHomeAutomation repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the FilPilote design in my own project?
The repository has no license, so all rights stay with LudovicLemarinel. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the FilPilote without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in EspHomeAutomation
8FilPilotes Base
73 × 94 mm75 parts2LNo license3
ESP82668Dimmers
100 × 100 mm74 parts2LNo license3
ESP82668Relays
67 × 93 mm44 parts2LNo license3
ESP82667RelaysEtCommun
67 × 93 mm42 parts2LNo license3
ESP8266Velux
67 × 62 mm25 parts2LNo license3
ESP8266LedDimmer ESP8266
50 × 45 mm19 parts2LNo license3
8RelaisReed
81.3 × 59.7 mm19 parts2LNo license3
ESP8266IN16 optoToESP8266
50 × 50 mm16 partsNo license3
Thermometer
36.9 × 36.9 mm12 parts2LNo license3
ESP82668FilPilotes
45 × 40 mm10 parts2LNo license3
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398