HardLabs

Siberian-01

luispa12·Siberian-01·hardware/Siberian_01.kicad_pcb

Siberian-01 PCB layout, top view — open source RP2040/RP2350 board by luispa12

About the Siberian-01 PCB

Siberian-01 is an open source RP2040/RP2350 PCB design by luispa12, published on GitHub. It is a 2-layer board measuring 26 × 56.9 mm, with 34 components from 16 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the AMS1117 and W25Q128JVS. By type, the board carries 16 capacitors, 7 resistors, 4 connectors, 3 ICs, 2 diodes and 1 crystal.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Siberian 1 is a development board based on the RP2040 microcontrolled.

This board is based on the RP2040 microcontroller from the Raspberry Foundation.

It is a development board with the minimun requirements for the RP2040 IC to properly works, it complies with the USB 2.0 protocol, full use of all the GPIO pins, on board linear regulator for the 3.3V, 1 led status and another led connected to pin GPIO17.

It was designed with the purpose to learn how to design, assemble, document and manufacture (JLCPCB) printed circuit boarda (PCB's).

Siberian-01, from the project README
From the project README

Main components on the Siberian-01

RP2040AMS1117W25Q128JVS

Siberian-01 bill of materials (BOM)

34 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
AMS1117
U2
1
W25Q128JVS
U3
1
Crystal
Y1
1
USB_B_Micro
J1
2
Conn_01x20_Male
J2, J3
1
Conn_01x03_Male
J4
1
PTS815_SJM_250_SMTR_LFS
SW1
2
LED
D1, D3
10
100n
C1, C2, C3, C4, C5, C6, C7, C10 +2
2
1u
C8, C9
2
10u
C12, C13
2
27p
C15, C16
2
27
R1, R2
1
DNF
R3
4
1k
R4, R5, R6, R8

Siberian-01 design files

The KiCad project lives in the luispa12/Siberian-01 repository on GitHub; these links point at the commit this page was built from.

Siberian-01: common questions

What microcontroller does the Siberian-01 use?

The Siberian-01 is built around the RP2040, from the RP2040/RP2350 family.

How big is the Siberian-01 PCB?

The Siberian-01 measures 26 × 56.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Siberian-01?

34 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Siberian-01 design files?

From the luispa12/Siberian-01 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Siberian-01 design in my own project?

The repository has no license, so all rights stay with luispa12. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Siberian-01 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards