Starbie-Lumpkinn

Lumpkinn·Starbie-Lumpkinn·KiCad Files/Lumpkinn's_Starbie.kicad_pcb

Starbie-Lumpkinn PCB layout, top view — open source ESP32 board by Lumpkinn

About the Starbie-Lumpkinn PCB

Starbie-Lumpkinn is an open source ESP32 PCB design by Lumpkinn, published on GitHub. It is a 2-layer board measuring 111.5 × 86.5 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the keyboards, displays & leds and sensors designs in this gallery.

From the project

My first Foray into hardware development!

The project has a few differences however, with the most notable ones being the different sprite.

The project itself is basically a mini digital pet, like a tamagotchi, but the main difference is the fact that it responds to movement, and it's environment, instead of just requiring the user to click a few buttons.

The Starbie itself is not too dissimilar from SharKing's Starbie, but it has a few differences, with the most obvious one being the new sprite. (Here's the sprite in question!)->

Starbie-Lumpkinn, from the project README
From the project README

Main components on the Starbie-Lumpkinn

Starbie-Lumpkinn bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
DHT11
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10k
R1

Starbie-Lumpkinn design files

The KiCad project lives in the Lumpkinn/Starbie-Lumpkinn repository on GitHub; these links point at the commit this page was built from.

Starbie-Lumpkinn: common questions

What microcontroller does the Starbie-Lumpkinn use?

The Starbie-Lumpkinn is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Starbie-Lumpkinn PCB?

The Starbie-Lumpkinn measures 111.5 × 86.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starbie-Lumpkinn?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Starbie-Lumpkinn design files?

From the Lumpkinn/Starbie-Lumpkinn repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Starbie-Lumpkinn design in my own project?

The repository has no license, so all rights stay with Lumpkinn. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Starbie-Lumpkinn without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards