DigiPiano
maanavkoladia·DigiPiano·hw/baseline_project.kicad_pcb
About the DigiPiano PCB
DigiPiano is an open source ESP32 PCB design by maanavkoladia, published on GitHub. It is a 2-layer board measuring 152 × 110.6 mm, with 40 components from 25 distinct parts.
Its main chip is the ESP32-DEVKITC, from the ESP32 family. Other key parts include the TM4C123GH6PMIR, LM2937ET-3.3/NOPB and EK-TM4C123GXL. By type, the board carries 15 capacitors, 9 connectors, 7 test points, 5 ICs, 2 resistors and 1 crystal.
It belongs with the iot & wireless, audio and sensors designs in this gallery.
From the project
The DigiPiano is a velocity-sensitive digital piano designed using STM32 and ESP32 microcontrollers. It combines advanced sensor technology, high-quality audio playback, and Bluetooth connectivity to deliver a realistic and modern musical experience.
The DigiPiano is a velocity-sensitive digital piano designed using STM32 and ESP32 microcontrollers. It combines advanced sensor technology, high-quality audio playback, and Bluetooth connectivity to deliver a realistic and modern musical experience.
- Key Tracking Mechanism: - Uses Hall effect sensors and magnets to detect key presses and releases. - Tracks key velocity to simulate the dynamics of a real piano.
Main components on the DigiPiano
DigiPiano bill of materials (BOM)
40 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TM4C123GH6PMIR | QFP50P1200X1200X160-64N | IC1 |
| 1 | LM2937ET-3.3/NOPB | T03B | U29 |
| 2 | EK-TM4C123GXL Texas Instruments | ti_EKTM4C123GXL | U30_BACKUP, U101_LP_STANDALONE |
| 1 | ESP32-DEVKITC | MODULE_ESP32-DEVKITC | U31_ESP32 |
| 1 | ABM3-16.000MHZ-B2-T | ABM3 | Y1 |
| 1 | Barrel_Jack | BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | J1_Barrel |
| 1 | Header_5 | PinHeader_1x05_P2.54mm_Vertical | J2_JTAG |
| 1 | Conn_01x06_Socket_DAC | Molex_KK-254_AE-6410-06A_1x06_P2.54mm_Vertical | J3_DAC |
| 1 | LCD SD HEADERS | Molex_KK-254_AE-6410-11A_1x11_P2.54mm_Vertical | J8_SDCARD |
| 1 | ADC2 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J9_ADC2 |
| 1 | ADC1 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J10_ADC1 |
| 1 | ADC3 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J11_ADC3 |
| 1 | 3.3V Pads | AMASS_XT30UPB-M_1x02_P5.0mm_Vertical | J12 |
| 1 | 5V Pads | AMASS_XT30UPB-M_1x02_P5.0mm_Vertical | J13 |
| 1 | RESET | SW_PUSH_6mm | SW1 |
| 7 | TestPoint | Pin_D1.0mm_L10.0mm | TP13, TP14, TP19, TP20, TP21, TP22, TP23 |
| 2 | 1UF 1uF | CP_Radial_Tantal200mil | C1, C2 |
| 1 | 2.2UF 2.2uF | CP_Radial_Tantal200mil | C3 |
| 5 | 0.1UF 0.1uF | C_Axial_200mil | C4, C5, C10, C12, C14 |
| 2 | 10PF 10pF | C_Axial_200mil | C6, C7 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1UF 1uF | C_Axial_200mil | C8, C11 |
| 2 | 0.01UF 0.01uF | C_Axial_200mil | C9, C13 |
| 1 | 10UF 10uF | C_Axial_200mil | C15 |
| 1 | 10K 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 1M | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
DigiPiano design files
The KiCad project lives in the maanavkoladia/DigiPiano repository on GitHub; these links point at the commit this page was built from.
DigiPiano: common questions
What microcontroller does the DigiPiano use?
The DigiPiano is built around the ESP32-DEVKITC, from the ESP32 family.
How big is the DigiPiano PCB?
The DigiPiano measures 152 × 110.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DigiPiano?
40 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DigiPiano design files?
From the maanavkoladia/DigiPiano repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DigiPiano design in my own project?
The repository has no license, so all rights stay with maanavkoladia. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DigiPiano without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k