19 open source boards using the TM4C123GH6PMIR

Real designs built with the TM4C123GH6PMIR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the TM4C123GH6PMIR

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the TM4C123GH6PMIR connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDC_1 pin has a capacitor to GND on 13 of 13 designs, most often 100 nF (then 1 µF).
  • The WAKE pin has a pull-up to 3.3V on 13 of 13 designs, most often 1 MΩ.
  • The RST pin has a pull-up to 3.3V on 13 of 13 designs, most often 10 kΩ.
  • The OSC0 pin has a crystal on 13 of 13 designs, most often 16 MHz.
PB6pin 1Connected to: Not connected 62% · a signal 38%
VDDApin 2Connected to: 3.3V 100%
  • Decoupling capacitor on 31% · 10 nF (4), 100 nF (1)
GNDApin 3Connected to: GND 100%
PB7pin 4Connected to: Not connected 69% · a signal 31%
PF4pin 5Connected to: Not connected 92%
PE3pin 6Connected to: Not connected 92%
PE2pin 7Connected to: Not connected 92%
PE1pin 8Connected to: Not connected 77% · a signal 23%
PE0pin 9Connected to: Not connected 77% · a signal 23%
PD7pin 10Connected to: Not connected 77% · a signal 23%
VDD_1pin 11Connected to: 3.3V 100%
  • Decoupling capacitor on 31% · 10 nF (3), 100 nF (3)
GND_1pin 12Connected to: GND 100%
PC7pin 13Connected to: Not connected 92%
PC6pin 14Connected to: Not connected 92%
PC5pin 15Connected to: Not connected 77% · a signal 23%
PC4pin 16Connected to: Not connected 92%
PA0/U0RXpin 17Connected to: Not connected 92%
PA1/U0TXpin 18Connected to: Not connected 92%
PA2/SSI0C1Kpin 19Connected to: Not connected 69% · a signal 31%
PA3/SSI0FSSpin 20Connected to: Not connected 69% · a signal 31%
PA4/SSI0RXpin 21Connected to: Not connected 77% · a signal 23%
PA5/SSI0TXpin 22Connected to: Not connected 69% · a signal 31%
PA6pin 23Connected to: Not connected 69% · a signal 31%
PA7pin 24Connected to: Not connected 69% · a signal 31%
VDDC_1pin 25Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (26), 1 µF (13), 2.2 µF (13)
VDD_2pin 26Connected to: 3.3V 100%
  • Decoupling capacitor on 31% · 10 nF (4)
GND_2pin 27Connected to: GND 100%
PF0pin 28Connected to: Not connected 69% · a signal 31%
PF1pin 29Connected to: Not connected 69% · a signal 31%
PF2pin 30Connected to: Not connected 69% · a signal 31%
PF3pin 31Connected to: Not connected 69% · a signal 31%
WAKEpin 32Connected to: Signal 100%
  • Pull-up to 3.3V on 100% · 1 MΩ (13)
HIBpin 33Connected to: Not connected 100%
XOSC0pin 34Connected to: GND 85% · not connected 15%
GNDXpin 35Connected to: GND 100%
XOSC1pin 36Connected to: Not connected 85% · GND 15%
VBATpin 37Connected to: 3.3V 100%
RSTpin 38Connected to: Signal 100%
  • Pull-up to 3.3V on 100% · 10 kΩ (13)
GND_3pin 39Connected to: GND 100%
OSC0pin 40Connected to: Signal 100%
  • Crystal on 100% · 16 MHz (13)
  • Capacitor to GND on 100% · 10 pF (13)

24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ECE 445L Lab 6 by Andres-Wearden, ECE-445L-final project by collebrusco, ECE445L Final Project by DylanMeeks and ECE 445L Baseline Project by Ethan-Hale.

The TM4C123GH6PMIR in open source designs

The gallery holds 19 open source boards using the TM4C123GH6PMIR from 13 GitHub repositories; a typical one measures about 114.4 × 88.9 mm and carries around 28 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is ECE445L Final Project by DylanMeeks.

Microcontrollers on boards using the TM4C123GH6PMIR

What boards using the TM4C123GH6PMIR are built for

TM4C123GH6PMIR: common questions

Where can I find a TM4C123GH6PMIR reference design?

Each of the 19 boards on this page is a real design using the TM4C123GH6PMIR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TM4C123GH6PMIR VDDC_1 pin connected?

The VDDC_1 pin has a capacitor to GND on 13 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the TM4C123GH6PMIR.

What pull-up resistor is used on the TM4C123GH6PMIR WAKE pin?

The WAKE pin has a pull-up to 3.3V on 13 of 13 designs, most often 1 MΩ. Counted from the KiCad layouts of 13 open source designs using the TM4C123GH6PMIR.

What pull-up resistor is used on the TM4C123GH6PMIR RST pin?

The RST pin has a pull-up to 3.3V on 13 of 13 designs, most often 10 kΩ. Counted from the KiCad layouts of 13 open source designs using the TM4C123GH6PMIR.

What parts are used alongside the TM4C123GH6PMIR?

The Adafruit ST7735R, LP2950-33LPRE3, EK-TM4C123GXL, LM2937ET-3.3/NOPB and LM4041CILPR appear in the most repositories here.

Which microcontrollers do boards using the TM4C123GH6PMIR use?

Most are built on ESP32 (5) and ESP8266 (3).

How big is a typical board using the TM4C123GH6PMIR?

The median is 114.4 × 88.9 mm, and 100% are two-layer designs.

What is the most popular open source board using the TM4C123GH6PMIR?

By GitHub stars, ECE445L Final Project by DylanMeeks, with 0 stars.

Can I simulate one of these boards using the TM4C123GH6PMIR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part