Garage

macdems·Garage

Garage PCB layout, top view — open source ESP32 board by macdems

About the Garage PCB

Garage is an open source ESP32 PCB design by macdems, published on GitHub. It is a 2-layer board measuring 90 × 100 mm, with 29 components from 22 distinct parts.

Its main chip is the ESP32-C3_SUPERMINI_TH, from the ESP32 family. Other key parts include the LM2940T-5.0/NOPB, ACS712xLCTR-05B and LM358. By type, the board carries 8 resistors, 4 ICs, 4 capacitors, 2 transistors, 2 connectors and 2 relays.

It belongs with the iot & wireless designs in this gallery.

From the project

Garage door control unit

This project provides a comprehensive solution for automating and monitoring a garage door using the ESP32-C3 Super Mini microcontroller. The controller integrates seamlessly with Home Assistant via ESPHome, enabling smart home automation and remote control.

- ESPHome integration for easy Home Assistant setup and monitoring - Current sensor for accurate detection of fully open/closed garage door states by monitoring motor current - External push button support for manual operation - 12V remote receiver compatibility (e.g., INEL ORS-X1T) for remote control - Compact hardware design fits…

Main components on the Garage

Garage bill of materials (BOM)

29 components, 22 distinct parts.

QtyPartRefs
1
LM2940T-5.0/NOPB
U1
1
ACS712xLCTR-05B
U2
1
LM358
U3
1
ESP32-C3_SUPERMINI_TH
U4
2
2N5551
Q1, Q2
1
AC L/N
J1
1
Gate
J2
1
Heatsink
HS1
2
Relay_SPST-NO
K1, K2
1
HLK-30M12C
PS1
1
10k
RV1
1
Button
SW1
1
Radio
SW2
2
1N4148
D1, D2
1
470nF
C1
1
22µF
C2
1
1nF
C3
1
22uF
C4
4
10k
R1, R2, R5, R6
2
68k
R3, R4
Show 2 more
QtyPartRefs
1
4k7
R7
1
5k6
R8

Garage design files

The KiCad project lives in the macdems/Garage repository on GitHub; these links point at the commit this page was built from.

Garage: common questions

What microcontroller does the Garage use?

The Garage is built around the ESP32-C3_SUPERMINI_TH, from the ESP32 family.

How big is the Garage PCB?

The Garage measures 90 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Garage?

29 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Garage design files?

From the macdems/Garage repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Garage design in my own project?

The repository has no license, so all rights stay with macdems. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Garage without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards