Echoes of Termina

machadoleonardo94·Echoes-of-Termina·Hardware/PCBs/Echoes_of_Termina/Echoes_of_Termina.kicad_pcb

Echoes of Termina PCB layout, top view — open source ESP32 board by machadoleonardo94

About the Echoes of Termina PCB

Echoes of Termina is an open source ESP32 PCB design by machadoleonardo94, published on GitHub. It is a 2-layer board measuring 99 × 59.5 mm, with 77 components from 30 distinct parts.

Its main chip is the ESP32-WROOM-32U-N8, from the ESP32 family. Other key parts include the TP4056, AP2112K-3.3, MAX98357A and INMP441. By type, the board carries 29 resistors, 17 capacitors, 8 diodes, 6 ICs, 4 connectors and 4 battery holders.

It belongs with the audio, iot & wireless and power & battery designs in this gallery.

From the project

ESP32 Audio devkit for I2S modules, with microSD slot and LED outputs

An audio-visual devkit built from simple parts: a battery-powered ESP32 board with a stereo speaker output, addressable LEDs, a microSD card and two buttons — plus the desktop tool that authors the lightshows it plays.

The project is three separable pieces that meet at the microSD card and the .echoes script format: Hardware/ (KiCad boards), Firmware/ (PlatformIO / Arduino for ESP32), and Executable/ (the Windows editor and analyser).

Echoes of Termina, from the project README
From the project README

Main components on the Echoes of Termina

Echoes of Termina bill of materials (BOM)

77 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TP4056
U1
1
AP2112K-3.3
U2
1
ESP32-WROOM-32U-N8
U3
2
MAX98357A
U4, U5
1
INMP441
U6
2
C42456992
PMOS
Q1, Q3
1
2N7002K
Q2
1
USB_C_RECEPTACLE_USB2.0_8P
USB_C_Receptacle_USB2.0_8P
J1
1
CONN_01X03_SOCKET
Conn_01x03_Socket
J2
2
CONN_01X02_SOCKET
Conn_01x02_Socket
J3, J4
1
CONN_01X02_SOCKET
Conn_01x02_Socket
BATT1
4
SW_Push
BT1, BT2, BT3, BT4
2
CONN_01X04_SOCKET
Conn_01x04_Socket
PORT1, PORT2
1
microSD tray
SHOU HAN(首韩)
TF1
1
CONN_01X03_SOCKET
Conn_01x03_Socket
TOUCH1
1
C965817
LED_BLUE
D2
1
C84256
LED_RED
D3
3
SS14
D4, D8, D9
1
C84256
LED_GREEN
D5
2
1N4148W
D6, D7
Show 10 more
QtyPartRefs
1
22N
22n
L1
7
10U
10u
C1, C4, C5, C13, C15, C17, C18
8
100N
100n
C2, C3, C6, C8, C12, C14, C16, C19
2
220UF
220uF
C7, C11
5
2.2K
2.2k
R1, R5, R8, R26, R27
1
C2683384
220mR 1W 1%
R2
9
10K
10k
R3, R4, R17, R28, R29, R30, R31, R32 +1
2
5.1K
5.1k
R6, R7
9
100K
100k
R9, R10, R18, R19, R20, R22, R23, R24 +1
3
330
R11, R16, R21

Echoes of Termina design files

The KiCad project lives in the machadoleonardo94/Echoes-of-Termina repository on GitHub; these links point at the commit this page was built from.

Echoes of Termina: common questions

What microcontroller does the Echoes of Termina use?

The Echoes of Termina is built around the ESP32-WROOM-32U-N8, from the ESP32 family.

How big is the Echoes of Termina PCB?

The Echoes of Termina measures 99 × 59.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Echoes of Termina?

77 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Echoes of Termina design files?

From the machadoleonardo94/Echoes-of-Termina repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Echoes of Termina design in my own project?

The repository has no license, so all rights stay with machadoleonardo94. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Echoes of Termina without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Echoes-of-Termina

Similar boards