Echoes V2
machadoleonardo94·Echoes-of-Termina·Hardware/PCBs/Echoes_V2/Echoes_V2.kicad_pcb
About the Echoes V2 PCB
Echoes V2 is an open source ESP32 PCB design by machadoleonardo94, published on GitHub. It is a 2-layer board measuring 99 × 59.5 mm, with 77 components from 30 distinct parts.
Its main chip is the ESP32-WROOM-32U-N8, from the ESP32 family. Other key parts include the TP4056, AP2112K-3.3, MAX98357A and INMP441. By type, the board carries 29 resistors, 17 capacitors, 8 diodes, 6 ICs, 4 connectors and 4 battery holders.
It belongs with the audio, iot & wireless and power & battery designs in this gallery.
From the project
ESP32 Audio devkit for I2S modules, with microSD slot and LED outputs
An audio-visual devkit built from simple parts: a battery-powered ESP32 board with a stereo speaker output, addressable LEDs, a microSD card and two buttons — plus the desktop tool that authors the lightshows it plays.
The project is three separable pieces that meet at the microSD card and the .echoes script format: Hardware/ (KiCad boards), Firmware/ (PlatformIO / Arduino for ESP32), and Executable/ (the Windows editor and analyser).

Main components on the Echoes V2
Echoes V2 bill of materials (BOM)
77 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056 | ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | ESP32-WROOM-32U-N8 | ESP32-WROOM-32U | U3 |
| 2 | MAX98357A | MAX98357A | U4, U5 |
| 1 | INMP441 | INMP441 Module | U6 |
| 2 | PMOS | SOT-23_Handsoldering | Q1, Q3 |
| 1 | 2N7002K | SOT-23 | Q2 |
| 1 | USB_C_Receptacle_USB2.0_8P | USB-C-SMD_GT-USB-7101A | J1 |
| 1 | Conn_01x03_Socket | TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | J2 |
| 2 | Conn_01x02_Socket | Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J3, J4 |
| 1 | Conn_01x02_Socket | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | BATT1 |
| 4 | SW_Push | SW_SPST_PTS647_Sx38 | BT1, BT2, BT3, BT4 |
| 2 | Conn_01x04_Socket | Hirose_DF13C_CL535-0404-8-51_1x04-1MP_P1.25mm_Vertical | PORT1, PORT2 |
| 1 | microSD tray SHOU HAN(首韩) | TF-SMD_TF-CARD-XG8P-H1.5 | TF1 |
| 1 | Conn_01x03_Socket | PinHeader_1x03_P2.54mm_Vertical | TOUCH1 |
| 1 | LED_BLUE | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LED_RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 3 | SS14 | D_SMA | D4, D8, D9 |
| 1 | LED_GREEN | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 2 | 1N4148W | D_SOD-123 | D6, D7 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22n | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 7 | 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C5, C13, C15, C17, C18 |
| 8 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C6, C8, C12, C14, C16, C19 |
| 2 | 220uF | Cap_polymer | C7, C11 |
| 5 | 2.2k | R_0805_2012Metric | R1, R5, R8, R26, R27 |
| 1 | 220mR 1W 1% | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 9 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R17, R28, R29, R30, R31, R32 +1 |
| 2 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 9 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R18, R19, R20, R22, R23, R24 +1 |
| 3 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R16, R21 |
Echoes V2 design files
The KiCad project lives in the machadoleonardo94/Echoes-of-Termina repository on GitHub; these links point at the commit this page was built from.
Echoes V2: common questions
What microcontroller does the Echoes V2 use?
The Echoes V2 is built around the ESP32-WROOM-32U-N8, from the ESP32 family.
How big is the Echoes V2 PCB?
The Echoes V2 measures 99 × 59.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Echoes V2?
77 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Echoes V2 design files?
From the machadoleonardo94/Echoes-of-Termina repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Echoes V2 design in my own project?
The repository has no license, so all rights stay with machadoleonardo94. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Echoes V2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Echoes-of-Termina
ESP32
Marajoara V3
machadoleonardo94
230.8 × 176.7 mm112 parts2LNo license0ESP32
Marajoara
machadoleonardo94
232 × 182.7 mm91 parts2LNo license0ESP32
Echoes of Termina
machadoleonardo94
99 × 59.5 mm77 parts2LNo license0Bottom 8 WS2812B
machadoleonardo94
27 × 36.2 mm17 parts2LNo license0Top 6 WS2812B
machadoleonardo94
27.3 × 30 mm13 parts2LNo license0Mid 2 WS2812B
machadoleonardo94
27.7 × 14.4 mm5 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k