Vinyl adc power
About the Vinyl adc power PCB
Vinyl adc power is an open source PCB design by MadsRudolph, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 18 components from 10 distinct parts.
Other key parts include the 74HC244 and TL072. By type, the board carries 8 capacitors, 5 resistors, 2 ICs, 2 diodes and 1 connector.
It belongs with the audio designs in this gallery.
From the project
Discrete 3rd-order delta-sigma audio ADC: stacked KiCad PCBs, SPICE simulations, 3D-printable enclosure, and laser-cut acrylic top
Assembly guide & bench log · Bring-up log, 16–18 September · 16 September bench plan · 6 September test handoff
All four boards are assembled and bench-screened with the AD3 (16–17 September): power, rev B digital with the on-board crystal Pierce, both channels and the full stack pass, after resoldering a crystal leg and swapping the reference op-amp U2 to an LM358 for output headroom on the charge-pump rail (design-notes §10b′). A Raspberry Pi 4 captures the stream, and a ripper service on it records sides automatically, splits and tags the tracks and hands finished albums to the Jellyfin…
Main components on the Vinyl adc power
Vinyl adc power bill of materials (BOM)
18 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC244 | DIP-20_W7.62mm_LongPads | U1 |
| 1 | TL072 | DIP-8_W7.62mm_LongPads | U2 |
| 1 | 2x8 BUS | PinHeader_2x08_P2.54mm_Vertical | J3 |
| 2 | 1N5817 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 1 | 470u | CP_Radial_D10.0mm_P5.00mm | C1 |
| 4 | 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C7, C8 |
| 1 | 10u | CP_Radial_D8.0mm_P3.50mm | C4 |
| 2 | 220u | CP_Radial_D8.0mm_P3.50mm | C5, C6 |
| 1 | 4R75 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 4 | 10k0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5 |
Vinyl adc power design files
The KiCad project lives in the MadsRudolph/vinyl-adc repository on GitHub; these links point at the commit this page was built from.
Vinyl adc power: common questions
How big is the Vinyl adc power PCB?
The Vinyl adc power measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vinyl adc power?
18 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Vinyl adc power design files?
From the MadsRudolph/vinyl-adc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Vinyl adc power design in my own project?
The repository has no license, so all rights stay with MadsRudolph. Use it as a reference, and ask the author before reusing the design.
More boards in vinyl-adc
Raspberry PiVinyl adc rev e
118 × 88 mm177 parts4LNo license0
Raspberry PiVinyl adc rev d
140 × 136 mm177 parts4LNo license0
Raspberry PiVinyl adc rev c
170 × 120 mm111 parts4LNo license0
Vinyl adc channel l
100 × 100 mm39 parts2LNo license0
Vinyl adc digital
100 × 100 mm18 parts2LNo license0
Vinyl adc osc
41.9 × 44 mm8 parts2LNo license0
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687