HardLabs

Vinyl adc rev e

MadsRudolph·vinyl-adc·hardware/kicad/rev_e/vinyl_adc_rev_e.kicad_pcb

Vinyl adc rev e PCB layout, top view — open source Raspberry Pi board by MadsRudolph

About the Vinyl adc rev e PCB

Vinyl adc rev e is an open source Raspberry Pi PCB design by MadsRudolph, published on GitHub. It is a 4-layer board measuring 118 × 88 mm, with 177 components from 65 distinct parts.

Its main chip is the RASPBERRY PI 4, from the Raspberry Pi family. Other key parts include the 74HC244, LM358, 74HCT132, 74HC4040 and 74HC157. By type, the board carries 69 resistors, 52 capacitors, 20 ICs, 16 diodes, 10 connectors and 3 transistors.

It belongs with the audio designs in this gallery.

From the project

Discrete 3rd-order delta-sigma audio ADC: stacked KiCad PCBs, SPICE simulations, 3D-printable enclosure, and laser-cut acrylic top

Rev D is the through-hole HAT built from the DTU shop's drawers. Rev E is the same circuit in surface-mount parts from any distributor (or PCBWay's assembly service), on a board a fifth the size of rev D's first layout. The sheet is drawn by tools/revelayout.py, which calls rev D's block functions unchanged and only swaps footprints and four part numbers, and tools/checkrevd.py vinyladcreve` runs rev D's own gate on it: the netlist is the reference sheet plus exactly rev D's additions, nothing inside the modulator loop moved.

Main components on the Vinyl adc rev e

74HC244LM35874HCT13274HC404074HC15774HC404974HCU0424LC32LM339TL072LM31174HC7474HC04

Vinyl adc rev e bill of materials (BOM)

177 components, 65 distinct parts.

QtyPartRefs
2
74HC244
U1, U10
1
LM358
U2
1
74HCT132
U3
1
74HC4040
U4
1
74HC157
U6
1
74HC4049
U8
1
74HCU04
U9
1
24LC32
U11
1
LM339
U12
4
TL072
U20, U22, U60, U62
2
LM311
U21, U61
2
74HC74
U23, U63
2
74HC04
U24, U64
1
BC847
Q1
2
BC857
Q2, Q3
1
6.144MHz
Y1
1
CLK SEL
J1
1
RASPBERRY PI 4
J2
1
TONEARM GND
J3
1
GND LIFT
J4
Show 45 more
QtyPartRefs
1
TP DIG
J5
1
WP
J6
1
LINE IN L
J20
1
TP L
J22
1
LINE IN R
J60
1
TP R
J62
2
47k
RV20, RV60
1
SHUTDOWN / WAKE GPIO3
SW1
1
USER GPIO23
SW2
2
SS14
D1, D2
3
GREEN
D3, D5, D10
2
YELLOW
D4, D9
3
RED
D6, D7, D8
4
1N4148W
D11, D12, D13, D14
2
S1M
D15, D16
2
10u
L1, L2
2
470u
C1, C18
31
100n
C2, C3, C7, C8, C9, C10, C11, C13 +23
4
10u
C4, C41, C42, C43
2
220u
C5, C6
2
27p
C16, C17
2
2u2
C20, C60
3
1n5
C21, C40, C61
6
220p
C22, C23, C24, C62, C63, C64
1
4R75
R1
13
10k0
R2, R3, R4, R5, R31, R32, R43, R48 +5
1
1M
R10
1
2k2
R11
2
475R
R12, R13
1
33R2
R14
1
3k92
R15
9
1k00
R16, R20, R40, R41, R42, R52, R57, R58 +1
1
10R0
R17
2
20k5
R21, R61
4
14k7
R22, R23, R62, R63
2
10k5
R24, R64
4
13k0
R25, R26, R65, R66
2
255k
R27, R67
2
5k90
R28, R68
4
8k25
R29, R30, R69, R70
8
22k1
R33, R35, R36, R44, R46, R73, R75, R76
2
165k
R34, R74
2
2k21
R37, R77
4
100k
R45, R47, R49, R59
3
330R
R54, R55, R56

Vinyl adc rev e design files

The KiCad project lives in the MadsRudolph/vinyl-adc repository on GitHub; these links point at the commit this page was built from.

Vinyl adc rev e: common questions

What microcontroller does the Vinyl adc rev e use?

The Vinyl adc rev e is built around the RASPBERRY PI 4, from the Raspberry Pi family.

How big is the Vinyl adc rev e PCB?

The Vinyl adc rev e measures 118 × 88 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Vinyl adc rev e?

177 components, from 65 distinct parts. The full bill of materials is listed on this page.

Where can I download the Vinyl adc rev e design files?

From the MadsRudolph/vinyl-adc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Vinyl adc rev e design in my own project?

The repository has no license, so all rights stay with MadsRudolph. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Vinyl adc rev e without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in vinyl-adc

Similar boards