Bumble tuby
majabojarska·bumble-tuby·amp/amp.kicad_pcb

About the Bumble tuby PCB
Bumble tuby is an open source PCB design by majabojarska, published on GitHub under the CC0-1.0 license. It is a 2-layer board, with 86 components from 36 distinct parts.
Other key parts include the TL074, LM386 and TL072. By type, the board carries 34 resistors, 30 capacitors, 6 ICs, 6 connectors, 2 switches and 2 diodes.
It belongs with the audio designs in this gallery.
From the project
My take on building a low-power, hybrid guitar amp
This is a relatively simple, hybrid guitar amplifier, made as a hobby project. To me it's mostly about learning, having fun, and building something tangible.
- Runs off of a single 12V DC supply - Pre-amp based on the 12AU7 vacuum tube - FX loop - Tone control section - Line in - Solid state power amplifiers (headphones, speaker) - Class D mono speaker amp - Class A stereo headphone amp
Main components on the Bumble tuby
Bumble tuby bill of materials (BOM)
86 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TL074 | U1, U2 | |
| 2 | LM386 | U3, U4 | |
| 1 | ~ | U5 | |
| 1 | TL072 | U6 | |
| 1 | S8050 | Q1 | |
| 1 | LO Input | J1 | |
| 1 | Headphones | J2 | |
| 1 | HI Input | J3 | |
| 1 | Speaker 8Ω | J4 | |
| 1 | FX Send | J5 | |
| 1 | FX Return | J6 | |
| 1 | 50K log | RV2 | |
| 1 | 500K lin | RV3 | |
| 1 | 100K | RV4 | |
| 1 | 10k | RV5 | |
| 1 | PWR | SW1 | |
| 1 | FX Enable/Bypass | SW2 | |
| 1 | 12AX7 | Valve_Noval_P | V1 |
| 1 | LED amber | D1 | |
| 1 | LED blue | D2 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 1uF | C3, C4, C5, C6, C9, C29, C30 | |
| 5 | 10uF | C7, C10, C22, C25, C28 | |
| 3 | 10nF | C8, C11, C20 | |
| 7 | 100nF | C12, C13, C16, C17, C21, C27, C34 | |
| 2 | 100uF | C14, C15 | |
| 2 | 220uF | C18, C19 | |
| 2 | 47nF | C23, C24 | |
| 1 | 2.2uF | C26 | |
| 1 | 1000uF | C33 | |
| 8 | 1M | R2, R12, R14, R16, R21, R25, R27, R31 | |
| 14 | 10K | R3, R4, R5, R6, R7, R8, R9, R10 +6 | |
| 4 | 220K | R13, R15, R33, R34 | |
| 2 | 4K7 | R17, R32 | |
| 2 | 47K | R20, R22 | |
| 2 | 10 | R23, R24 | |
| 2 | 100 | R26, R28 |
Bumble tuby design files
The KiCad project lives in the majabojarska/bumble-tuby repository on GitHub; these links point at the commit this page was built from.
- Layoutamp/amp.kicad_pcb
- Schematicamp/amp.kicad_sch
- BOMstatic/amp_bom.csv
Bumble tuby: common questions
How big is the Bumble tuby PCB?
The Bumble tuby has 2 copper layers and is 1.6 mm thick.
How many components are on the Bumble tuby?
86 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bumble tuby design files?
From the majabojarska/bumble-tuby repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Bumble tuby design in my own project?
Yes, under the terms of its CC0-1.0 license, which majabojarska chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687