Scroll dial
maker-lukas·Scroll-Dial·Kicad/scroll dial/scroll dial.kicad_pcb
About the Scroll dial PCB
Scroll dial is an open source Nordic nRF PCB design by maker-lukas, published on GitHub. It is a 2-layer board measuring 20 × 44.7 mm, with 12 components from 11 distinct parts.
Its main chip is the XIAO-NRF52840-DIP, from the Nordic nRF family. Other key parts include the XIAO-NRF52840-SMD. By type, the board carries 4 resistors, 3 connectors, 2 ICs, 2 capacitors and 1 switch.
It belongs with the keyboards, sensors and iot & wireless designs in this gallery.
From the project
A scroll dial using the AS5600 sensor and a small macropad
- Smooth and very accurate scrolling up to 0.08° - AS5600 sensor - Wireless - Macropad for more functionality # BOM
This will cover the PCB, Schematic and 3D models of both the Sccoll dial as the Macropad

Main components on the Scroll dial
Scroll dial bill of materials (BOM)
12 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-NRF52840-DIP AS5600 | SOIC8 | U1 |
| 1 | XIAO-NRF52840-SMD XIAO-nRF52840-SMD | XIAO-nRF52840-SMD | U3 |
| 1 | CONN_01X02 Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | CONN_01X02 Conn_01x05_Pin | PinSocket_1x05_P2.00mm_Vertical | J2 |
| 1 | CONN_01X05_PIN Conn_01x05_Pin | PinHeader_1x05_P2.00mm_Vertical | J3 |
| 1 | OS102011MS2QN1 | SW_Slide_SPDT_Straight_CK_OS102011MS2Q | S1 |
| 1 | 100 nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 6,7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 2 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
Scroll dial design files
The KiCad project lives in the maker-lukas/Scroll-Dial repository on GitHub; these links point at the commit this page was built from.
Scroll dial: common questions
What microcontroller does the Scroll dial use?
The Scroll dial is built around the XIAO-NRF52840-DIP, from the Nordic nRF family.
How big is the Scroll dial PCB?
The Scroll dial measures 20 × 44.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Scroll dial?
12 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Scroll dial design files?
From the maker-lukas/Scroll-Dial repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Scroll dial design in my own project?
The repository has no license, so all rights stay with maker-lukas. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Scroll dial without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in Scroll-Dial
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381