28 open source boards using the XIAO-nRF52840-DIP

Real designs built with the XIAO-nRF52840-DIP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

28 boardsClear filters|Most starred

How designs wire the XIAO-nRF52840-DIP

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the XIAO-nRF52840-DIP connects to, and the resistors, capacitors and other passives placed on it.

  • The 3V3 pin is left unconnected on 5 of 6 designs.
  • The VBUS pin is left unconnected on 5 of 6 designs.
  • The P1.15_MOSI_D10 pin is left unconnected on 4 of 6 designs (a signal on 2).
  • The GND pin is left unconnected on 4 of 6 designs (GND on 2).
P1.15_MOSI_D10pin 11Connected to: Not connected 67% · a signal 33%
3V3pin 12Connected to: Not connected 83% · 3.3V 17%
GNDpin 13Connected to: Not connected 67% · GND 33%
VBUSpin 14Connected to: Not connected 83% · 5V 17%

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tao Te Ching by sudo-apt-install-tap, Scroll dial by maker-lukas, Splitly by mannireis and Keypad by MaprilBear.

The XIAO-nRF52840-DIP in open source designs

The gallery holds 28 open source boards using the XIAO-nRF52840-DIP from 23 GitHub repositories; a typical one measures about 203.1 × 125.1 mm and carries around 21 components.

100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is XIAO by Josephrp.

Microcontrollers on boards using the XIAO-nRF52840-DIP

XIAO-nRF52840-DIP: common questions

Where can I find a XIAO-nRF52840-DIP reference design?

Each of the 28 boards on this page is a real design using the XIAO-nRF52840-DIP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the XIAO-nRF52840-DIP 3V3 pin connected?

The 3V3 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the XIAO-nRF52840-DIP.

How is the XIAO-nRF52840-DIP VBUS pin connected?

The VBUS pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the XIAO-nRF52840-DIP.

How is the XIAO-nRF52840-DIP P1.15_MOSI_D10 pin connected?

The P1.15_MOSI_D10 pin is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 7 open source designs using the XIAO-nRF52840-DIP.

What parts are used alongside the XIAO-nRF52840-DIP?

The XIAO-nRF52840-SMD, XIAO-ESP32-C3-DIP, XIAO-ESP32-C3-SMD, XIAO-ESP32-C5-SMD and XIAO-ESP32-C6-DIP appear in the most repositories here.

Which microcontrollers do boards using the XIAO-nRF52840-DIP use?

Most are built on RP2040/RP2350 (15), Nordic nRF (12) and ESP32 (1).

How big is a typical board using the XIAO-nRF52840-DIP?

The median is 203.1 × 125.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the XIAO-nRF52840-DIP?

By GitHub stars, XIAO by Josephrp, with 12 stars.

Can I simulate one of these boards using the XIAO-nRF52840-DIP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part